La Crosse Technology 617-249V2 Handleiding

Bekijk gratis de handleiding van La Crosse Technology 617-249V2 (2 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over La Crosse Technology 617-249V2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WWVB ATOMIC TIME SIGNAL

Page | 2Page | 3Page | 4

1.8” LED Atomic Clock

with Dual Alarms and USB Charging

Model: 617-249v2

DC:062220

POWER UP

1. Insert the provided stand into bottom of clock.

2. Insert the 5.0 volt power cord into an outlet, then into your

clock. Remove the insulation tab from the CR2032 battery.

1. Press then release the SET button to enter the Settings Menu.

2. Press and release the + or - buttons to adjust the values.

Hold to adjust quickly.

3. Press and release the SET button to confirm and move to the next

item.

Settings Menu Order:

• Time Zone

• DST ON/OFF

• Hour

• Minutes

• Snooze Duration

SETTINGS

FIND FAQS, AND MORE UNDER THE TAB HERE:SUPPORT

bit.ly/617-249

1 X CR2032

LITHIUM BATTERY

(INCLUDED)

5.0 V adapter

(included)

IMPORTANT: When powered on, the clock will immediately search for

the WWVB Atomic Time SIgnal for 7 minutes.

• Hold the ATOMIC button for 3 seconds to stop or start the search.

• During the atomic time search the buttons will not function.

• Backlight will dim.

• USB charge port will not work.

Signal Search Indicator:

• Receiving strong WWVB signal: LED flashing

• Successful Reception: LED solid

• Failed Reception: LED disappears

The clock will automatically search for the WWVB signal every night

at 1:00 am, 2:00 am and 3:00 am. If there is still no WWVB reception,

the clock will search WWVB time signal again at 4:00 am and 5:00 am

alternatively.

For best WWVB Atomic Time Signal Reception: Please keep your clock

three feet away from electrical outlets and other electronics, to avoid

interference.

ALARM 1 & 2

In one setting for Alarm 1 & 2 you are able to::

• Set Alarm Time

• Activate/Deactivate Alarm

• Select Volume (HI/LO)

Note:A1 A2 The Blue LED Light next to the or indicates alarm is active.

Set Alarm 1 & 2:

1. Press then release the ALM 1 • 2 button to enter the Alarm Settings.

2. Press and release the + or - buttons to adjust the values. Hold to

adjust quickly.

3. Press and release the ALM 1 • 2 button to confirm and move to the

next item.

Alarm Settings Order:

• Alarm 1 Hour

• Alarm 1 Minutes

• Alarm 1 OFF/ON

• Alarm 1 HI/LO (volume)

• Alarm 2 Hour

• Alarm 2 Minutes

• Alarm 2 OFF/ON

• Alarm 2 HI/LO (volume)

Stop Alarm for 1 Day:

When alarm sounds. press the ALM 1 • 2 button once to stop the alarm

and reset to come on in 24 hours.

Snooze:

When alarm is sounding, press once, the alarm will be silenced

and come on again after the snooze duration selected.

Tip: if your second alarm activates while the first alarm is sounding or it is

in the snooze mode, the second alarm overrides the first alarm (the first

alarm is reset to come on the next day).

Product specificaties