La Crosse Technology 513-1211 Handleiding

La Crosse Technology Wekkerradio 513-1211

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 513-1211 (4 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 1

Model: 1211.513 1211A513- -

Instruction Manual

DC: 081114

ATOMIC DIGITAL CLOCK

FRONT

VIEW

FOLDOUT

LEG

STAND

Battery

Compartment

3 “AA”

Time + Alarm

Calendar + Indoor Temperature

BACK

VIEW

TIME ZONE

SELECTOR

BUTTONS

Time Zone Indicator

Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 2

TIME ZONES

PST Pacific

MST Mountain

CST Central

EST Eastern

GET STARTED

Step 1: Use the time zone selector (on back) to choose your time zone.

Step 2: Insert 3 AA batteries (not included) into the clock. Observe the new

correct polarity.

Restart: If there is no indoor temperature data after 60 seconds remove ,

batteries from the clock and press a button 20 times. After15 minutes, return to

Step 1 above.

SET TIME, DATE AND TEMPERATURE

1. Hold the button to enter time set mode. SET

2. Press the WAVE/+ DST/ or - buttons to adjust values.

3. Press the button to confirm and move to the next item.SET

TIME SET ORDER:

1. 12/24 hour time format

2. Hour

3. Minutes

4. Year

5. Month

6. Date

Press the button to exit, or SET wait 20 seconds without pressing buttons to

return to the normal time display.

DAYLIGHT SAVING TIME SETTING

 Hold the button for 3 seconds to select DST on or o. DST

 The DST icon appears in above the seconds when DST is on.DST

TIME ZONE SELECTION

Slide the time zone selector bar on the back of the clock to

choose the time zone for your area.

FAHRENHEIT/CELSIUS

Hold the button for 3 seconds to select Fahrenheit or Celsius °C/°F

temperature readings.

SET TIME ALARM

Press the button once to enter Alarm Mode. The letters will show in the SET AL

seconds display.

1. Hold the button for 3 seconds to enter alarm time set SET

mode.

2. Press the WAVE/+ DST/ or - buttons to adjust values.

3. Press the button to confirm and move to the next item.SET

Alarm Time setting order: 1. Hours, 2. Minutes

Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 3

Alarm

Bell Icon

Snooze

Icon

ACTIVATE/DEACTIVATE TIME ALARM

 Press the button once to view alarm time.SET

 Press the WAVE/+ DST/ or - buttons to activate the alarm.

Once activated, the bell icon appears.

 Press the WAVE/+ DST/ or - buttons to deactivate the alarm.

The bell icon will disappear.

SNOOZE (SILENCES ALARM TEMPORARILY)

 When alarm sounds, press the button to silence the SNOOZE

alarm for 5 minutes. The alarm icon will flash.

 In snooze mode, press any button to stop alarm for one day.

Note: The alarm will sound for 2 minutes and then shut off completely.

MANUAL WWVB RADIO CONTROLLED (ATOMIC) TIME SEARCH-

 Press the WAVE/+ button to start or stop a manual signal search. WWVB

Icon will flash when searching.

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

ATOMIC SIGNAL SEARCH: The clock will search every 2 hours until the WWVB

time signal is received. After reception, this clock will only search for the atomic

signal after midnight.

ATOMIC CLOCK CARE AND MAINTENANCE

 Do not mix old and new batteries

 Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

 Always purchase the correct size and grade of battery most suitable for intended use.

 Replace all batteries of a set at the same time.

 Clean the battery contacts and also those of the device prior to battery installation.

 Ensure the batteries are installed with correct polarity (+and -).

 Remove batteries from equipment which is not to be used for an extended period.

 Remove expired batteries promptly.

 Do not expose to extreme temperature, vibration or shock.

 Clean with a soft damp cloth. Do not use solvents or scouring agents.

 The clock is not a toy. Keep it out of reach of children.

 The clock is not to be used for medical purpose or for public information. It is intended

for home use only.

 The specs of this clock may change without prior notice.

 Improper use or unauthorized opening of housing voids warranty.

 If the clock is not working properly, change the batteries.

SPECIFICATIONS

Temperature Range: +14 to +122 °F (- 10 to +50 °C)

Power: 3 AA, IEC, LR6 batteries (not included)-

Dimensions: 10.75" x 1.38" x 16.75" (273.05 x 30.052 x 425.45 mm)

WWVB

Atomic Icon

Product specificaties

Merk:	La Crosse Technology
Categorie:	Wekkerradio
Model:	513-1211
Kleur van het product:	Zilver
Breedte:	425.5 mm
Diepte:	35 mm
Hoogte:	273 mm
Agenda:	Ja
Snooze functie:	Ja
Ondersteund aantal accu's/batterijen:	3
Thermometer:	Ja
Type beeldscherm:	Digitaal
Type batterij:	AA