Kichler Cobson 42649OZ Handleiding

Bekijk gratis de handleiding van Kichler Cobson 42649OZ (2 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Kichler Cobson 42649OZ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1) Pass fixture wire from coupling on top of fixture body through

hole in end of threaded pipe with hexnut. Thread end of

hexnut into coupling on top of fixture body.

2) Pass fixture wire from end of threaded pipe through bottom

of top trim piece. Lower top trim piece down over end of

threaded pipe. Set top trim piece on top of fixture body.

3) Pass fixture wire through hole in top cap. Lower top cap

down and pass hole in top cap over end of threaded pipe.

Set top cap down on top of top trim.

4) Pass fixture wire through hole in coupling. Thread coupling

onto end of threaded pipe protruding from top trim.

5) Pass fixture wire from coupling through bottom of stem.

Thread end of stem into coupling.

Thread locking compound must be applied to all NOTE:

stem threads as noted with symbol () to prevent accidental 3

rotation of fixture during cleaning, relamping, etc.

6) Pass fixture wire through remaining stems and screw stems

together.

7) Thread one small threaded pipe into end of each small loop.

8) Pass fixture wire through first loop. Thread first loop onto

end of last stem.

9) Pass fixture wire through second loop and through hole in

canopy.

10) Pass threaded pipe at end of second loop through hole in

canopy.

11) Pass fixture wire through hole in lockwasher. Thread

lockwasher onto end of threaded pipe protruding from

inside canopy.

12) Pass fixture wire through hole in hexnut. Thread hexnut onto

end of threaded pipe.

13) Attach chain link to small loop at end of stem and to loop on

canopy.

14) TURN OFF POWER.

IMPORTANT: Before you start, NEVER attempt any work

without shutting off the electricity until the work is done.

a) Go to the main fuse, or circuit breaker, box in your

home. Place the main power switch in the “OFF”

position.

b) Unscrew the fuse(s), or switch “OFF” the circuit breaker

switch(s), that control the power to the fixture or room

that you are working on.

c) Place the wall switch in the “OFF” position. If the fixture

to be replaced has a switch or pull chain, place those in

the “OFF” position.

15) Find the appropriate threaded holes on mounting strap.

Assemble mounting screws into threaded holes.

16) Attach mounting strap to outlet box. (Screws not provided).

Mounting strap can be adjusted to suit position of fixture.

17) Grounding instructions: (See Illus. A or B).

A) On fixtures where mounting strap is provided with a

hole and two raised dimples. Wrap ground wire from

outlet box around green ground screw, and thread into

hole.

B) On fixtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If fixture is provided with ground wire. Connect fixture

ground wire to outlet box ground wire with wire connector

(not provided.) after following the above steps. Never

connect ground wire to black or white power supply wires.

MOUNTING STRAP

ABRAZADERA DE MONTAJE

CANOPY

ESCUDETE

Date Issued: 8/28/15IS-42649-US

GREEN GROUND

SCREW

CUPPED

WASHER

A

B

OUTLETBOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

(NOTPROVIDED)

OUTLETBOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

SEE OTHER SIDE FOR SPANISH TRANSLATIONS.

VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.

KNURL KNOB

PERILLA ESTRADA

3

CHAIN LINK

ESLABÓN DE CADENA

STEM

VASTAGO

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

SMALL LOOP

LAZO PEQUEÑO

3

FIXTURE BODY

CUERPO DEL

ARTEFACTO

18) Make wire connections (connectors not provided). Reference

chart below for correct connections and wire accordingly.

19) Push fixture to ceiling, carefully passing mounting screws

through holes in canopy.

20) Thread knurl knobs onto mounting screws. Tighten knurl

knobs to secure fixture to ceiling.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

BlackWhite

*Parallel cord (round & smooth)*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

COUPLING

ACOPLAMIENTO

TOP CAP

CASQUILLO SUPERIOR

TOP TRIM

ADORNO SUPERIOR

THREADED PIPE

TUBO ROSCADO

HEXNUT

TUERCA HEXAGONAL

Product specificaties