BenQ iScreenBar Handleiding
Pagina's 65 Lamp
Bekijk de handleiding van BenQ iScreenBar gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
iScreenBar
BenQ.com
© 2026 BenQ Corporation.
All rights reserved. Rights of modification reserved.
P/N: 96-05-00009-G
4J.W4201.001
User Guide
1English
Package Contents
The package should include the following items. If anything is missing or
damaged, please contact the place of purchase immediately.
The illustrations in this guide are for your reference only and may look different from
the appearance of the actual product.
Safety Warnings
• Connect the power cord to a USB-C power source (5V DC, 3A). Failure to do
so may result in malfunction or fire.
• The light source of this lamp is non-user replaceable. Once the light source
needs replacement (such as at the end of its life), contact the manufacturer
or its service agent for replacement.
• Do not place or hang any objects on the lamp to avoid malfunction.
• Route the USB power cord to avoid it being pinched by items placed upon or
against it.
Installation
As shown in the figure on the right,
magnetically attach the iScreenBar
unit to the center of the monitor’s back
panel. Adjust the position of the
magnetic back clip to align the oval
microphone hole with the microphone
intake on the back of the monitor,
then plug the power cord into the USB-
C port.
You may also use the included magnetic
cable organizer
to manage the power
cord as needed.
• 1 x iScreenBar lamp (with USB-C power cord)
• 1 x Quick Start Guide
• 1 x Magnetic cable organizer
• 1 x Warranty card
• In the event of any of the following, disconnect the USB-C cable
immediately and contact an authorized service provider or
qualified technician for assistance:
- The product enclosure is damaged.
- The product emits an unusual odor or smoke.
- The product flickers abnormally during operation.
- The power cord is damaged or internal wiring is exposed.
• Do not expose the product to moisture or high-humidity
environments (e.g., bathrooms, outdoors) to prevent short
circuits or electrical accidents.
• This product is for indoor use only. Do not install or use it
outdoors.
• Do not disassemble any part of this product. Unauthorized
disassembly may cause injury and will void the warranty.
CAUTION
1
3
2
1
2
3
4
4
2English
Operating Instructions
Control Interface
Use the touch-sensitive buttons on the lamp head to operate the various
functions. Refer to the illustration below for the name and location of each
button:
When the lamp is off in extremely low-light environments, all indicator lights will
automatically turn off to prevent sleep disturbance.
Power On/Off and Auto-Dimming Mode
• Do not obstruct the ambient light sensor on the
lamp to ensure the Auto-Dimming Mode
functions correctly.
• In Auto-Dimming Mode, the lamp continuously
monitors the surrounding environment and
adjusts brightness dynamically.
• Manual Override: If you manually adjust the
brightness while in Auto-Dimming Mode, the
mode will be deactivated, and the indicator will
turn off.
Presence Detection buttonBrightness Decrease button
Video Mode buttonBrightness Increase button
Color Temperature Decrease buttonAuto-Dimming Mode Button
Color Temperature Increase buttonPower Button
1
2
3
4
5
6
7
8
1
5
2
6
3
7
4
8
Power On/Off
To turn the lamp on, tap the Power button. To turn it
off, tap the Power button again.
Using Auto-Dimming Mode
With the lamp on, tap the Auto-Dimming Mode button
. The Auto-Dimming Mode indicator will illuminate. In
this mode, the lamp automatically detects ambient
light to adjust brightness in real-time.
Ambient light sensor
Product specificaties
| Merk: | BenQ |
| Categorie: | Lamp |
| Model: | iScreenBar |
Heb je hulp nodig?
Als je hulp nodig hebt met BenQ iScreenBar stel dan hieronder een vraag en andere gebruikers zullen je antwoorden