Jung DWPM17360 Handleiding (13 Pagina's)

LB management

LB managementLB management

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPM17360WW

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPM17360AL

Operating instructions

Operating instructionsOperating instructions

1

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the device or load. In

Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

device and or load.device and or load.

Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-

Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-

pending on the insert used, the load is not electrically isolated from the mains, even when the

pending on the insert used, the load is not electrically isolated from the mains, even when thepending on the insert used, the load is not electrically isolated from the mains, even when the

device is switched off.

device is switched off.device is switched off.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

2

22 Device components

Device components

Device componentsDevice components

Figure1: Device components

(1) FMinsert

(2) Sensor top

(3) Brightness sensor

(4) Button Bluetooth

Bluetooth

BluetoothBluetooth Ʃ

(5) Sensor window and status LEDs

(6) Decor ring

1 / 13

82599323 25.10.2019

J0082599323

LB management

LB managementLB management

Motion and presence detector

(7) Push-on cover

Status LED

Status LEDStatus LED

Red LED lights up Self-test

Red LED flashes 3 s on / 3 s off Alarm function active

Red LED flashes 0.5 s on / 0.5 s off Alarm was triggered

Red LED flashes three times followed by a 1 s

pause

Cover was previously connected to another in-

sert

Yellow LED lights up "Off" or "Off for 0.5 - 5 hours" function active

Yellow LED flashes Presence simulation active

Green LED lights up "On" or "On for 0.5 - 5 hours" function active

Blue LED lights up Device is coupled with a mobile end device

and active app

Blue LED flashes 0.5 s on / 0.5 s off Bluetooth coupling mode active

3

33 Intended use

Intended use

Intended useIntended use

– Automatic switching of lighting depending on the heat motion and ambient brightness

– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB

management

– Ceiling installation on flush-mounted insert.

Product characteristics

Product characteristicsProduct characteristics

Functions directly on the cover

– Extension of the detection area in combination with 3-wire extension

– Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button

– Dimming light via extension with dimming insert

– Resetting to factory setting

– Push-on cover for limiting the detection field

Functions via app

– Setting the device as presence detector or motion detector

– Setting the switch-on threshold

– Separate adjustment of the sensitivity of the three PIR sensors

– Setting the run-on time

– On or off

– On or off for 0.5 - 5 hours

– Switch-off warning

– Dynamic run-on time

– Presence simulation

– Alarm function

– Timer function

– Walking test

In combination with a switch insert

– Pulse operation

In combination with a dimming insert

– Switch on with last saved brightness or saved switch-on brightness

– Adjusting the minimum brightness

– Adjusting the maximum brightness

– Hotel function

2 / 13

82599323 25.10.2019

J0082599323

LB management

LB managementLB management

Motion and presence detector

– Night light function

– Constant light regulation

Automatic operation

Automatic operationAutomatic operation

The device detects heat motions of people, animals and objects.

– The light is switched on if a person enters the detection field and the brightness threshold

is below the set brightness threshold.

– The run-on time restarts with each detected motion.

– The light is switched off, if:

no more movement is detected in the detection field and the run-on time has elapsed or

the ambient light is too bright and the run-on time has elapsed.

To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a

brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions

to keep the time as short as possible.

Behaviour after a mains voltage failure

Behaviour after a mains voltage failureBehaviour after a mains voltage failure

After mains voltage return, the device performs a self-test for a maximum of 20 seconds. After

the self-test has been completed, the device is ready for operation.

If the red status LED flashes three times at repeated intervals, the cover was previously

connected to another insert. To enable the function again, either place the cover onto the

respective insert or press the Bluetooth button (4) for longer than 4 seconds.

The following applies during the self-test:

– The red status LED is illuminated.

– The load is switched off.

– Movements are not detected

– The device can be operated via extensions

4

44 Commissioning

Commissioning

CommissioningCommissioning

Install app on a mobile end device

Install app on a mobile end deviceInstall app on a mobile end device

Requirement for operation via app is a mobile end device with Bluetooth interface, running the

Android operating system or iOS.

￭ Download and install the Clever Config app from the iTunes App Store (iOS) or Google

Play Store (Android).

Couple mobile end devices via Bluetooth

Couple mobile end devices via BluetoothCouple mobile end devices via Bluetooth

Precondition: insert and cover must be ready for operation. The mobile end device is located

close to the cover.

￭ Activate coupling mode: Press the Bluetooth

Bluetooth

BluetoothBluetooth button (4) (Figure 1) for more than 4Ʃ

seconds.

The blue LED flashes. The coupling mode is active for one minute.

￭ Start the Bluetooth app and search for device to be coupled.

Cover is coupled with the end device and shown in the app.

The coupling mode is automatically exited after successful coupling. The blue LED lights

up to confirm an active connection.

A maximum of 8 mobile end devices can be coupled with a cover. When coupling the 9th

device, the oldest device will be deleted.

5

55 Operation

Operation

OperationOperation

The app is used for the configuration and operation of the device. Some basic functions can

also be operated via connected extensions.

3 / 13

82599323 25.10.2019

J0082599323

Merk:	Jung
Categorie:	Bewegingsdetector
Model:	DWPM17360

Jung DWPM17360 Handleiding

Product specificaties

Heb je hulp nodig?

Handleiding Bewegingsdetector Jung

Handleiding Bewegingsdetector

Nieuwste handleidingen voor Bewegingsdetector