IOGEAR GVE340 Handleiding

IOGEAR AV extender GVE340

Lees hieronder de 📖 handleiding in het Nederlandse voor IOGEAR GVE340 (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1 x GVE340 Transmitter

1 x GVE340 Receiver

1 x Power Adapter (For transmitter)

2 x IR Extender cables

Transmitter

Receiver

- HDMI output from source

- HDMI input to display

The GVE340 HDMI HDBaseT-Lite Extender extends an HDBaseT signal

up to 70m from the HDBaseT source using one Cat 5e/6/6a cable.

GVE340 supports RS-232 and IR signal pass-through, allowing you to

control the HDMI source device from the remote unit (GVE340R) while

also allowing access to the HDMI display device from the local unit

(GVE340T) as an HDMI local pass-through. IR signals can also be

extended in both directions.

The GVE340 features Power over HDBaseT (POH) which can send

power over Cat 5e/6/6a cable without an additional power supply.

The GVE340 is HDMI (3D, Deep Color, 4k) and HDCP compatible. The

GVE340 is perfect for a digital entertainment center or any installation

that requires superior video quality.

1. Link LED

2. Power LED

3. F/W Upgrade Port and Switch

4. IR Port (Connect to IR Receiver)

1. Connect the HDMI Input Port on the GVE340T to the HDMI Output

Port on your video source device using HDMI cable.

left view

right view

left view

right view

2. Connect one end of the RJ-45 cable to the HDBaseT output port

on the transmitter. Then connect the other end of the RJ-45 cable

to the HDBaseT input port on the receiver.

2 x Terminal blocks

1 x Quick Installation Guide

1 x Warranty Card

5. RS-232 Port

6. HDMI Input Port

7. HDBaseT Output Port

8. Power Jack

1. HDMI Out LED

2. LInk LED

3. Power LED

4. HDBaseT Input Port

5. Power Jack (Optional)

6. F/W upgrade switch

7. IR Port (Connect to IR Receiver)

8. RS-232 Port

9. HDMI Output Port

Video Source

Quick Start Guide

GVE340

PART NO. Q1527

www.iogear.com

HDBaseT HD Extender with RS-232

and IR Support

Receiver

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

IOGEAR

iogear.custhelp.com

support@iogear.com

www.iogear.com

3. Connect the HDMI Output Port on the GVE340R to the HDMI

Input Port on your video display device using HDMI Cable.

You can connect RS-232 serial devices/peripherals to the GVE340, such

as touchscreens or bar code scanners. The RS-232 signal transmission

flow is shown in the following example:

From a source device, the RS-232 signal is transmitted (Tx) to the

GVE340T receiving (Rx) unit; the GVE340R transmits (Tx) signals to the

display device (Rx).

4. Plug the power adapter cable into the power jack on the GVE340T.

Video Display

5. (Optional) Plug the power adapter cable into the power jack on the

GVE340R.

Receiver

Transmitter

6. (Optional) Connect your computer or controller system to the

terminal block on the GVE340 to serial commands.

7. (Optional) Connect an IR Transmitter/Receiver to the IR port on

the GVE340.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

FCC Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

Limited Warranty

This product carries a 3 Year Warranty. For the terms and conditions of

this warranty, please go to http://www.iogear.com/support/warranty

Important Product Information

Product Model

Serial Number

Product specificaties

Merk:	IOGEAR
Categorie:	AV extender
Model:	GVE340
Kleur van het product:	Zwart
Gewicht:	453.5 g
Breedte:	279.4 mm
Diepte:	101.6 mm
Hoogte:	28.5 mm
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
Stroom:	3 A
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	4096 x 2160 Pixels
Inclusief AC-adapter:	Ja
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Metaal
HDMI versie:	1.4
Temperatuur bij opslag:	-20 - 60 °C
Rack-montage:	Ja
HDBaseT-gecertificeerd:	Ja
HDMI in:	1
Bandbreedte:	10.2 Gbit/s
Aantal HDMI-uitgangen:	1
Operating voltage:	5 V
HDBaseT-poort:	Ja
Maximaal bereik:	70 m
Stroomverbruik (typisch):	3.6 W
Bedrijfstemperatuur (T-T):	-17 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Ondersteundende kabel types:	Cat5e, Cat6, Cat6a
IR-extender inbegrepen:	Ja
IR-emitter inbegrepen:	Ja