IOGEAR GWHD2DKIT Handleiding

IOGEAR AV extender GWHD2DKIT

Lees hieronder de 📖 handleiding in het Nederlandse voor IOGEAR GWHD2DKIT (16 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Share ProTM Mini Transmisor de Video HD Inalámbrico

y Kit de Receptor

Guía de conﬁguración rápide

Share ProTM Mini Kit Émetteur et Récepteur Vidéo HD

Sans Fil

Guide de démarrage rapide

Share ProTM Mini Wireless HD Video Transmitter

and Receiver Kit

Quick Start Guide

www.iogear.com

GWHD2DKIT

PART NO. Q1584-b

1 x Mini wireless transmitter

1 x Mini wireless receiver

2 x HDMI cable extender

1 x 90° HDMI adapter

2 x USB-A male-to-USB micro power cables

1 x Quick Start Guide

1 x Warranty Card

Package Contents

• 1 HDMI source device (DVD, PS3, Satellite box, PC etc.) with USB-A connector

that carries power (and not used as a firmware upgrade port)

• 1 HDMI display device (HDTV, projector with HDMI port, etc.) with USB-A

connector that carries power (and not used as a firmware upgrade port)

Note: In the case that there is no USB-A port that supplies power, please use a 5V

USB power adapter with a minimum of 500mA output (not included in the package).

System Requirements

Transmitter

A. HDMI output male connector

B. Wireless signal indicator (Red LED)

C. Power input

D. Power indicator (Blue LED)

Receiver

E. HDMI input male connector

F. Wireless signal indicator (Red LED)

G. Power input

H. Power indicator (Blue LED)

Overview

A E

F G H

B C D

STEP 1

Turn on both the video source and the display (TV or projector). Make sure that

the input source on your display corresponds to the HDMI port that the transmitter

is connected to.

STEP 2

Insert the transmitter into the HDMI port of your video source device.

STEP 3

Use one of the USB charging cables to connect to the micro USB port of the

transmitter to a type USB-A port on the source device to obtain power. In a rare

case that the source device has no USB port, please use a 5V USB power adapter

with a minimum of 500mA output (not included in the package). At this time both

the power LED (blue) and the wireless LED (red) will light up solid and then the

wireless LED (red) will go out and come back on and both will remain solid.

In case the space around the HDMI port is too tight or the position is too awkward

and could cause a connection issue, use the HDMI cable extender or the 90

degree HDMI adapter included in the package to correct this issue or to increase

the spacing.

Hardware Installation

2Transmitter

Transmitter

Product specificaties

Merk:	IOGEAR
Categorie:	AV extender
Model:	GWHD2DKIT
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
USB-connectortype:	Micro-USB
Connectiviteitstechnologie:	Draadloos
Maximum resolutie:	1920 x 1080 Pixels
Aantal USB-aansluitingen:	2
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Materiaal:	Kunststof
HDMI versie:	1.3
WLAN gegevensoverdrachtsnelheid (tweede band):	5000 Mbit/s
Netwerkstandaard:	IEEE 802.11ac
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-10 - 70 °C
Ondersteunt Mac-besturingssysteem:	Ja
Luchtvochtigheid bij opslag:	0 - 90 procent
Stroomvoorziening via USB:	Ja
HDMI in:	1
HDCP versie:	1.2
Aantal HDMI-uitgangen:	1
Wifi:	Ja
Stroomverbruik (typisch):	3 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent