Husqvarna 325HE4X Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna 325HE4X (28 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
EEEEnnnngggglllliiiisssshhhh
325HE3
X-series
325HE4
X-series
Operator′s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.
KEY TO SYMBOLS
2 – English
Symbols
WARNING! Incorrect or careless
use of a hedge trimmer can turn it
into a dangerous tool that can cause
serious or even fatal injury. It is
extremely important that you read
and understand the contents of this
operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved hearing protection
• Approved eye protection
This product is in accordance with
applicable EC directives.
Cutting tool. Do not touch the tool
without rst switching off the
engine.
This machine is not electrically
insulated. If the machine
touches or comes close to high-
voltage power lines it could lead
to death or serious bodily injury.
Electricity can jump from one
point to another by arcing. The
higher the voltage, the greater
the distance electricity can
jump. Electricity can also travel
through branches and other
objects, especially if they are
wet. Always keep a distance of at least 10 m between the
machine and high-voltage power lines and/or any objects
that are touching them. If have to work within this safe
distance you should always contact the relevant power
company to make sure the power is switched off before
you start work.
This machine can be dangerous! The operator of the
machine must ensure, while working, that no persons or
animals come closer than 15 metres.
Arrows which show limits for handle
positioning.
Keep all parts of your body away from
hot surfaces.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots or shoes.
Noise emission to the environment
according to the European
Community’s Directive. The
machine’s emission is specified in
chapter Technical data and on label.
Other symbols/decals on the machine refer to special
certication requirements for certain markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
CONTENTS
English – 3
Contents
Note the f
ollowing before
starting:
Please read the operator’s manual carefully.
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
INTRODUCTION
Dear Customer, .................................................... 4
WHAT IS WHAT?
What is what? ....................................................... 5
GENERAL SAFETY PRECAUTIONS
Important .............................................................. 6
Personal protective equipment ............................. 6
Machine′s safety equipment ................................. 7
ASSEMBLY
Fitting the hand guard and loop handle ................ 10
Fitting the handle .................................................. 10
Adjusting the harness ........................................... 10
Fitting the impact guard ........................................ 10
FUEL HANDLING
Fuel safety ............................................................ 11
Fuel ...................................................................... 11
Fuelling ................................................................. 12
STARTING AND STOPPING
Check before starting ........................................... 13
Starting and stopping ........................................... 13
WORKING TECHNIQUES
General working instructions ................................ 15
Transport position ................................................. 17
MAINTENANCE
Carburettor ........................................................... 18
Muffler .................................................................. 19
Cooling system ..................................................... 19
Spark plug ............................................................ 19
Air lter ................................................................. 20
Gear ..................................................................... 20
Cleaning and lubrication ....................................... 21
Maintenance schedule ......................................... 22
TECHNICAL DATA
Technical data ...................................................... 23
EC-declaration of conformity ................................ 24
!
WARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
WARNING! Under no circumstances may
the design of the machine be modied
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING! Incorrect or careless use of a
hedge trimmer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the
contents of this operator’s manual.


Product specificaties

Merk: Husqvarna
Categorie: Heggenschaar
Model: 325HE4X

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna 325HE4X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heggenschaar Husqvarna

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar