Haws 1107P Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Haws 1107P gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
03/25Model 107107Page 1B / 1107P / 1S 1 4 of
1455 Kleppe Lane Sparks, NV 89431(775) 359Fax (775) 359-6467 -4712 -7424
E- mail: haws@hawsco.comwebsite: www.hawsco.com
No. 0510002275 (1)
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
Model 1071071071B/1P/1S
Drinking Fountain
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
LIMITED WARRANTY
HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for a
period ofone year from the date of shipment. The foregoing notwithstanding, HAWSwarrants certain
specific products or components thereof for an adjusted period. A list of these excepted products and
components and a description of their respective warranty terms may be found here:
www.hawsco.com/warranty. HAWS’ liability under this warranty shall be discharged by furnishing without
charge F.O.B. HAWSfactory any goods, or part thereof, which shall appear to the Company upon inspection
to be of defective material or not of firstclass workmanship, provided that a claim is made in writing to -
Company within a reasonable period after receipt of the product. Where claims for defects are made, the
defective part or parts shall be delivered to the Company, prepaid, for inspection. shall not be liable HAWS
for the cost of repairs, alterations or replacements, or the labor required to implement them, or for any
expense connected therewith made by the owner or owner’s agents, except upon written authority from
HAWS. HAWSshall not be liable for any damages caused by defective materials or poor workmanship,
except for replacements, as provided above. Buyer agrees that has made no other warranties either HAWS
express or implied in addition to those above stated, except that of title with respect to any of the products
or equipment sold hereunder and that shall not be liable for general, special, incidental, or HAWS
consequential damages claimed to arise under the contract of sale.
Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions
provided are adhered to. The units also must be used for the purpose for which they were intended. Any
HAWS emergency equipment is intended to supplement faid treatment. Due to widely varying conditions, irst-
HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury or the
aggravation of existing or prior injuries.
EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY MAYNOT BE MODIFIED OR EXTENDED WITHOUT THE WRITTEN
CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE EXCLUSIVE. IN NO
EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE, CONSEQUENTIAL OR INCIDENTAL
DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF USE OR
PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY DAMAGE, OR OTHER MONETARY
LOSS.
03/25Model 107107Page 1B / 1107P / 1S 2 4 of
Models
Model 1B 107
Model 1P 107
Model 1S 107
1920
BP7
1 107
1 107
6700
6700
6700
BP15
1920
BP7
1107
BP15
BP7
03/25Model 107107Page 1B / 1107P / 1S 3 4 of
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable
wrench, 10" pipe wrench, 3/“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench 3232” and 5/
or open end wrench.
LOCATION OF UNIT:1 The Model 107is a wheelchair accessible drinking facility. The
height dimensions shown, meet current ADA requirements. When installing this unit, local,
state or federal codes should be adhered to. If height other than shown is required, then
dimensions must be adjusted accordingly.
SUPPLY LINE: flowing M“IPS w/ 30-(2-inimum recommended line size is 1/290 psi 6 ATM)
pressure. Where sediment or mineral content is a problem, an inlet filter is recommended.
PLUMBING CONNECTIONS: 1- Inlet is 3/8” O.D. . Waste outlet istube1/4” O.D. tube.
ELECTRICAL CONNECTIONS: 115VAC, 60HZ, 4.7AMPS. Chiller wired direct to incoming
line, by others.
PARTS LIST
FOR ALL MODELS
QUANTITY
ITEMS INCLUDED
6700
1
Mounting Plate
BP7
1
Back Panel
1 107
1
Bowl Assembly with push button
valve
FOR MODELS 1P1S 107, 107
QUANTITY
ITEMS INCLUDED
1920 OR 1920HO
1
Vandal Resistant Bottle Filler
BP 15
1
Back Panel
6700
1
Mounting Plate
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:1--- 8007665612
FOR CUSTOMER SERVICE: 1--- 8886404297
Product specificaties
| Merk: | Haws |
| Categorie: | Niet gecategoriseerd |
| Model: | 1107P |
Heb je hulp nodig?
Als je hulp nodig hebt met Haws 1107P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden