Haws 1011.8P Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Haws 1011.8P gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
12/241011101110111011 Model 1011.8B / .8P / .8S / .8PF / .8SF Page 1 4 of
1455 Kleppe Lane Sparks, NV 89431(775) 359Fax (775) 3597424-6467 -4712 -
E-mail:
[email protected]website: www.hawsco.com
No. 0510002221 (3)
Model /.8PF/ 101110111011.8S.8B/.8P/10111011.8SF
Water Cooler
LIMITED WARRANTY
HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for a
period ofone year from the date of shipment. The foregoing notwithstanding, warrants certain HAWS
specific products or components thereof for an adjusted period. A list of these excepted products and
components and a description of their respective warranty terms may be found here:
www.hawsco.com/warranty. HAWS’ liability under this warranty shall be discharged by furnishing without
charge F.O.B. factory any goods, or part thereof, which shall appear to the Company upon inspection HAWS
to be of defective material or not of firstclass workmanship, provided that a claim is made in writing to -
Company within a reasonable period after receipt of the product. Where claims for defects are made, the
defective part or parts shall be delivered to the Company, prepaid, for inspection. shall not be liable for HAWS
the cost of repairs, alterations or replacements, or the labor required to implement them, or for any expense
connected therewith made by the owner or owner’s agents, except upon written authority from HAWS. HAWS
shall not be liable for any damages caused by defective materials or poor workmanship, except for
replacements, as provided above. Buyer agrees that has made no other warranties either express or HAWS
implied in addition to those above stated, except that of title with respect to any of the products or equipment
sold hereunder and that shall not be liable for general, special, incidental, or consequential damages HAWS
claimed to arise under the contract of sale.
Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions
provided are adhered to. The units also must be used for the purpose for which they were intended. Any
HAWS emergency equipment is intended to supplement firstaid treatment. Due to widely varying conditions, -
HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury or the
aggravation of existing or prior injuries.
EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE WRITTEN
CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE EXCLUSIVE. IN NO
EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE, CONSEQUENTIAL OR INCIDENTAL
DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF USE OR
PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY DAMAGE, OR OTHER MONETARY LOSS.
CAUTION! Prior to making any electrical connections, verify with a voltmeter that power from the service
panel is off.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
Haws electric water cooler’s are not designed or recommended for outdoor or corrosive
environments such as enclosed chlorinated pool areas.
Consideration must be made at the time of installation to adhere to state and/or local codes and
environmental/atmospheric conditions such as, but not limited to, dust, corrosion, freezing etc.
These conditions will void the warranty.
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
12/241011101110111011 Model 1011.8B / .8P / .8S / .8PF / .8SF Page 2 4 of
Models
Model 1011.8B
Model 1011.8P
Model 1011.8PF
Model 1011.8S
Model 1011.8SF
MTGFR.LG
MTGFR.LG
MTGFR.LG
6700
6700
HCR8
HCR8
HCR8
1920HO
1920
BP32
BP32
1011.8
1011.8
1011.8
6480 (1011.8PF Only)
6480 (1011.SF Only)
12/241011101110111011 Model 1011.8B / .8P / .8S / .8PF / .8SF Page 3 4 of
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable
wrench, 10" pipe wrench, 3/32” and 5/32 “ hex key wrench, 9/16”, 1/2", 7/16” socket wrench
or open end wrench.
LOCATION OF UNIT: The Model 1011.8 Cooler is a wheelchair accessible drinking facility.
The height dimensions shown, meet current ADA requirements. When installing this unit,
local, state or federal codes should be adhered to. If height other than shown is required,
then dimensions must be adjusted accordingly.
SUPPLY LINE: flowing Minimum recommended line size is 1/290 psi “IPS w/ 30-(2-6 ATM)
pressure. Where sediment or mineral content is a problem, an inlet filter is recommended.
PLUMBING CONNECTIONS: 1- Inlet is 3/8” O.D. tube. Waste outlet is1/4” O.D. tube.
ELECTRICAL CONNECTIONS: 115VAC, 60HZ, 4.7AMPS. Chiller wired direct to incoming
line, by others.
PARTS LIST
FOR ALL MODELS
QUANTITY
ITEMS INCLUDED
MTGFR.LG
1
Mounting Frame
3
#10 Sheet Metal Screws
HCR8
1
Chiller
1011.8
2
Bowl Assembly with push button
valve
1
Package supply tubing assembly with
strainer, tubes and fittings
1
Panelbowl back-
1
Grille
1
Package of two each-grille
attachment clips, clip nuts, #10 sheet
metal screws and 632 screws.-
2
Waste Elbow 11/4” O.D.-
8
5/1618 retainer nuts-
8
5/1618 x 1 hex head screws-
FOR MODELS 1011.8P,
1011.8PF, 1011.8S, & 1011.8SF
QUANTITY
ITEMS INCLUDED
1920 OR 1920HO
1
Vandal Resistant Bottle Filler
BP32
1
Back Panel
6700
1
Mounting Plate
FOR MODELS 1011.8PF &
1011.8SF
QUANTITY
ITEMS INCLUDED
6480
1
Universal Filter Kit
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:1--- 8007665612
FOR CUSTOMER SERVICE: 1--- 8886404297
Product specificaties
| Merk: | Haws |
| Categorie: | Niet gecategoriseerd |
| Model: | 1011.8P |
Heb je hulp nodig?
Als je hulp nodig hebt met Haws 1011.8P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden