Haws 3603 Handleiding
Pagina's 13 Niet gecategoriseerd
Bekijk de handleiding van Haws 3603 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
04/25Model360360 s 3/3F Page 1 of 13
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail:
[email protected] website: www.hawsco.com
No. 0510000753 (6)
MODELS 3 03F (with F 360& 36ilter)
Outdoor Triple Drinking Fountain
LIMITED WARRANTY
HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for a
period ofThe foregoing notwithstanding, warrants certain one year from the date of shipment. HAWS
specific products or components thereof for an adjusted period. A list of these excepted products and
components and a description of their respective warranty terms may be found here:
www.hawsco.com/warranty. HAWS’ liability under this warranty shall be discharged by furnishing without
charge F.O.B. HAWSfactory any goods, or part thereof, which shall appear to the Company upon inspection
to be of defective material or not of firstclass workmanship, provided that a claim is made in writing to -
Company within a reasonable period after receipt of the product. Where claims for defects are made, the
defective part or parts shall be delivered to the Company, prepaid, for inspection. shall not be liable HAWS
for the cost of repairs, alterations or replacements, or the labor required to implement them, or for any
expense connected therewith made by the owner or owner’s agents, except upon written authority from
HAWS. HAWSshall not be liable for any damages caused by defective materials or poor workmanship,
except for replacements, as provided above. Buyer agrees that has made no other warranties either HAWS
express or implied in addition to those above stated, except that of title with respect to any of the products
or equipment sold hereunder and that shall not be liable for general, special, incidental, or HAWS
consequential damages claimed to arise under the contract of sale.
Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions
provided are adhered to. The units also must be used for the purpose for which they were intended. Any
HAWS emergency equipment is intended to supplement firstaid treatment. Due to widely -varying conditions,
HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury or the
aggravation of existing or prior injuries.
EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE
WRITTEN CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE,
CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED TO
DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY
DAMAGE, OR OTHER MONETARY LOSS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:1--- 8007665612
FOR CUSTOMER SERVICE: 1--- 8886404297
04/25Model360360 s 3/3F Page 2 of 13
RECOMMENDED TOOLS:
- Measuring Tape
- PVC Pipe Cutter
- Plastic Tubing Cutter
- PVC Solvent Weld Glue
- ¼” Bit-Holding Screwdriver
- Level
- 10” Pipe Wrench
- Adjustable Plier
- 1/8 and 5/32 Tamper Resistant Hex Bits (Supplied)
- 9/16” Box/Open and 5/8” Combination Wrenches, 8” Max Length
- 3/8” Socket Wrench/Rachet, 8” Max Length
- 9/16” Deep Socket
- 15/16” Socket
LOCATION OF UNIT: The 3F Model 3603603/(with Filter)Fountaincan be installed and
assembled to be by first locating the pedestal base ADA accessibleon a hardscape with
dimensions that comply with your local, state, and federal codes regarding clear floor space
and pedestrian protection area. Refer to the last page of this document for more information.
When the right pedestal arm is installed in the high orientation, the height dimensions shown
on the model specification sheetmeet current Federal Americans with Disabilities Act (ADA)
wheelchair requirements. When a fountainon top of the pedestal is installed , the height
dimensions shown on the model specification sheet meet current ADA standing height
requirements. federal codes When installing this unit, local, state and (including ADA) must be
adhered to. If height other than shown is required, then dimensions must be adjusted
accordingly.
ATTENTION:For model 360Filter), the Operating 3F (model with 3000-gallon capacity
Temperature Range for the 6477 Filter supplied separately) Kit Assembly (Required - is
4010037.8° F - ° ° – F (4.4C ° C).
SUPPLY LINE: Model 3603 – The minimum recommended line size is 1/2“IPS with 3090 psi -
(2-6 ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended. Model 3603F T(with 3000-gallon capacity Filter) –he minimum
recommended line size is 1/2“IPS with 40-90 psi (2.76-6 ATM) flowing pressure.
PLUMBING CONNECTIONS: Model 3603 – Water supply inlet connection is a 3/8“O.D.
compression fitting. Waste outlet is 1-1/2” . PVC pipeModel 3603F – Water supply inlet and
outlet connection (for Filter) is a 3/8“O.D. push-in type fitting. Waste outlet is 11/2” PVC pipe. -
Plumbing connections vary depending on how is configured during assembly. will each model
Please consult the installation drawings below for supply and waste fitting arrangements and
assembly for your specific model.
MAINTENANCE: Models 3603 & 3603F Periodically clean the pushbuttonvalve strainer.
Refer to 5874for more information. SeriesValve Operation and Maintenance Manual Model
3603F – Filter replacement to occur at 1 year maximum or 3,000 gallons maximum, whichever
comes first. Replace gallon capacity) per Filter Replacement instructions listed on filter (3000-
model 6477 Operation & Maintenance Manual.
04/25Model360360 s 3/3F Page 3 of 13
INSTALLATION PROCEDURE
GENERAL NOTES:
1. For all compression fitting connections, only connect NSF61 copperor plastic -
3/8” outside diameter tubing. The following assembly instructions must be
followed to ensure a watertight connection:
a. Cut tubing square and clean. Deburr if necessary.
b. Place compression nut and ferrule over end of tubing.
c. For plastic tubing (must be ¼” inside diameter), insert supplied tubing
insert into end of tubing.
d. Push tube into the fitting until it bottoms out.
e. Thread nut onto fitting and tighten snugly with 5/8” wrenches.
*For more information about Haws products, see our website:
www.hawsco.com
© 2025 Haws
®
– Corporation All Rights Reserved
HAWS
®
and other trademarks used
in these materials are the exclusive property of Haws Corporation.
Tube Sizes
O.D.
Tolerance
Insertion Depth
3/8”
±.005”
3/4”
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow
1a.
For 3603 – Verify minimum 30 psi
flowing supply pressure.For 360 3F –
Verify minimum 40 psi flowing supply
pressure.
b.
Check that inlet screwdriver stop valve
is wide open.inlet strainer or Clean
adjust valve to increase flow. See
5874Series Valve Manual*.
c.
For 3603F (Only) – Check water filter.
Replace at 1 year or 3,000 gallons
(max.), whichever comes first.
Product specificaties
| Merk: | Haws |
| Categorie: | Niet gecategoriseerd |
| Model: | 3603 |
Heb je hulp nodig?
Als je hulp nodig hebt met Haws 3603 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden