Golden Lighting Monroe 7041-SF Handleiding

Bekijk gratis de handleiding van Golden Lighting Monroe 7041-SF (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.8 sterren uit 5 reviews. Heb je een vraag over Golden Lighting Monroe 7041-SF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Assembly Instructions: 7041-3/SF(Monroe)

IMPORTANT:

•ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

•SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

•USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

For Customer Service, please

contact the place of purchase.

House Wires

Fixture Wires

Hot

How to Identify the Fixture’s Wires

HotNeutralGround

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes above.

Shut off the power at the circuit breaker and completely remove the old

xturefromtheceiling,includingtheoldmountingstrap.

1.Mountingstrap(B)containsseveralpairsofthreadedholesandmay

havetwoofmountingscrews(D)attached.Ifso,youmayneedtotighten

hexnuts(C)thatholdthescrewsinplace.Ifmountingstrap(B)doesnot

havemountingscrews(A)attached,pleasendthescrewsandhexnuts

youremovedfromcanopy(S)andattachtothemountingstrapusinghex

nuts (C).

2.Placemountingstrap(B)uptoyourjunctionbox.Placecanopy(S)over

themountingstrapliningupmountingscrews(D)withtheholesincanopy

(S).Securemountingstrap(B)tothejunctionboxwithmountingscrews(A)

andascrewdriver.Tightenthescrewssecurely.

3.Oneofconnectorrods(N)hasthexture’swiresinside.Hookconnector

rods(N)totheframeatloops(Q)andthenpullthexturewiresuntiltaut.

Attach the top of connector rods (N) to canopy (S) at loops (R).

CONNECTING THE WIRES

4.Haveanassistantsupportthextureweightwhilecompletingthewiring.

Cutawayexcesswire.Attachthexture’swirestothepowersupplywires

fromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite

(orribbed);groundtoground(greenorcopper).Twisttheendsofthewire

pairstogether,thentwistonawireconnector.Makesurealltwistsarein

thesamedirection.Ifthereisnogroundwire(greenorcopper)fromthe

junctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthe

xturegroundwirearoundthegreengroundscrew(E).Useascrewdriver

tosecuregroundscrew(E)ontothemountingbracket.Tuckallwiresneatly

intothejunctionbox.

Please note that the xture may be hung as a

pendant or a semi-ushmount, please decide

how you would like the xture to be installed

and refer to the related instructions.

FINISHING THE INSTALLATION

5.Raisecanopy(S)totheceiling.Positionmountingscrews(A)sothattheyprotrudethroughtheopeningsofcanopy(S).

6.Securecanopy(S)tomountingstrap(B)withdecorativenuts(F).

7.Slideglassshades(P)oversockets(M)andsecureinplacewithsocketcovers(O).

8.

Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended

wattage.

Yourinstallationiscomplete.Turnonthepowerandtestthexture.

FLUSH INSTALLATION

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

Please note that mounting

strap (B) is used in this

installation option. In this

conguration, canopy

(S) attaches directly to

mounting strap (B). do not

use top loop (L - please

ip the page and review

the diagram for more

information).

Q

N

M

O

P

R

F

D

C

B

A

E

S

Product specificaties