Flir FB-650-O Handleiding

Bekijk gratis de handleiding van Flir FB-650-O (3 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Flir FB-650-O of wil je andere gebruikers van dit product iets vragen? Stel een vraag

421-0056-00-28 Revision 120September 2023

This document does not contain any export-controlled information.

FC-Series De-Ice Kit

Installation Guide

Caution!

The de-ice kit improves the camera’s de-icing capability, which results in a slight

reduction in thermal sensor sensitivity. It should only be installed during the winter

and in places where it is cold enough for ice to likely accumulate.

Do not smudge or leave finger prints on the de-ice kit or on the camera lens.

Handle only the de-ice kit’s windowed ring, the factory-installed unwindowed ring

on the camera lens, and the O-ring at the bottom of the threaded inside rim of the

camera lens.

Step 1Turn on the heaters using the camera’s web page:

•For FC-Series O / ID cameras:

a.Log in to the camera’s web page as expert or admin.

b.In the Maintenance menu, browse to Sensor > Devices >

Thermostat. The camera firmware version must be V2.03.P06 or

later. For information about upgrading the camera’s firmware, see

the FC-Series O / ID Installation and User Guide.

Except as described in this guide, do not disassemble the FC-Series camera.

Damage to the camera can occur as the result of careless handling or

electrostatic discharge (ESD).

You can install this de-ice kit on an FC-Series camera with a 75 mm lens. Do not

use this kit with any other camera or lens.

Teledyne FLIR LLC

Antennvägen 6

PO Box 7376, SE-187

15 Täby

Stockholm County, 187 66

Sweden

Support: https://support.flir.com/

Items Included in Kit

SpannerWindowed

ringwrench

Product specificaties