Airlive AirCam EYDL-840MXAI-MS-2713 Handleiding
Pagina's 18 Bewakingscamera
Bekijk de handleiding van Airlive AirCam EYDL-840MXAI-MS-2713 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
www.airlive.com
V2.0
2
Connecting the camera tosystem (reference only)
Figure 1: Working WithPoEswitchandNVR
1. To power ON the camera,aPoEswitchisused, when a PoE switch is not available or the
camera is connected directlytoaRouter.ThentheDC12V Input of the camera can be used.
(By default, the cameracomeswithoutpoweradapter).
Figure 2: Camera Connector
Figure 3: Waterproofing work (network connector)
2. MicroSD Card slot: For models that support a MicroSD card the max capacity is 512GB.
Depending on the model, the SD slot is on the back/top of the camera marked MicroSD Slot.
Note that not all models have an SD-Slot, consult the camera spec sheet for more details.
Note:
1.The camera should be connected to a 12-volt power supply if you do not use PoE
(Power over Ethernet).
2.A Windows computer ismore convenient to setup and troubleshooting.
DC 12V IN
RJ-45 (PoE In)
3
Camera’sIPaddress assignment
Default IPaddress: 192.168.0.123 (DHCP)
Username: admin, Password: 123456
difgyfuroctaesnidrtnWlolhferwrcostpdaun(yom mg
Obtaining IP settings automatically byDHCP
This series camera default network configuration is DHCP mode, you can get IP
settings assigned automatically from the LAN router or DHCP server, otherwise, the
camera will set its own IP address to 192.168.0.123 in a few seconds for local
access. The camera will save the obtained IP settings to static configuration after 24
hours continues running to keep your system working more stable.
Youcan install the AirLive Search Tools IIto quickly configure the IP camera.
➢Using AirLive Search Tools II (SettingTool)
Click Start Search andall your cameras in the LAN will be listed in seconds.
If you prefer to assign camera IP address manually, you’d better confirm the IP
network planning and avoid IP address conflict.
Itis user-friendly that the search tool can calculate the selected cameras number to
match the range of Start IP and End IP.
To download the AirLive Search Tools II
Visit https://www.airlive.com/en/product/sr/SMB/AirCam-
Network-Surveillance
and select your IP Camera and go to Download and select the software.
Product specificaties
| Merk: | Airlive |
| Categorie: | Bewakingscamera |
| Model: | AirCam EYDL-840MXAI-MS-2713 |
Heb je hulp nodig?
Als je hulp nodig hebt met Airlive AirCam EYDL-840MXAI-MS-2713 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden