Flir FH-625 R Handleiding

Bekijk gratis de handleiding van Flir FH-625 R (11 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.7 sterren uit 9 reviews. Heb je een vraag over Flir FH-625 R of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FH-Series QIG Rev 120

November 2022

This document does not contain any export-controlled information.

FH-Series

Quick Install Guide

1 Check Contents

The camera kit includes a bag containing:

·

a T10 Torx wrench

·

two 10-pin connectors for I/O terminal blocks

·

one three-pin connector for 12 VDC terminal block

·

three two-pin connectors for 24 VAC output / input terminal blocks

In addition, watertight cable glands and seal plugs are attached to the camera's

rear cable ingress holes.

If any of these items are missing or damaged, contact your dealer or Teledyne

FLIR Support.

Caution

·

Teledyne FLIR recommends only trained personnel install the camera.

·

Before installing an FH-Series camera, Teledyne FLIR

recommends reading and understanding the FH-Series

Installation and User Guide (427-0102-00-10). To download

the guide, scan the QR code at right.

·

Except as described in these guides, do not open an FH-Series

camera or attempt to disassemble it. Attempting to

disassemble the camera can cause permanent damage and voids the

warranty.

·

Electrostatic discharge (ESD) or careless handling can cause damage to the

camera. To avoid damaging electrostatic-sensitive components, always

handle the camera with care.

·

Be careful not to leave fingerprints on the FH-Series camera’s infrared optics.

Product specificaties