Ferm FBF-8E Handleiding
Ferm
Freesmachine
FBF-8E
Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm FBF-8E (6 pagina's) in de categorie Freesmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
Ferm B.V. • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0302-13
Ferm Plunge Router
FBF-8E
USER’S MANUAL
Art.nr. 726120
Screwfix nr. 17118
UK Subject to change
Document Ref:
FBF-8E/17118/PMR12/Issue 1/Mar 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm 11
EXPLODED VIEW
FERM FBF-8E PLUNGE ROUTER
USERS MANUAL
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
The package contains:
1 Router
1 Parallel guide – unassembled
1 Guide bush
2 Screws
2 Nuts
1 8mm collet
1 6mm collet
1 Collet
1 Cutter
1 dust extractor adaptor
1 Spanner
1 Instruction Manual
1 Guarantee card"
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
1 On/off switch
2 Handle
3 Router base
4 Locking bolt for parallel guide
5 Opening for parallel guide
6 Collet nut
7 Spindle lock
8 Revolver-depth stop
9 Locking bolt depth stop
10 Depth stop
11 Clamping lever
12 Scale cutting depth
13 Adjusting wheel electronic speed control
SAFETY INSTRUCTIONS
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards, they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 850 W
No load speed | min-1
| 9000–28000
Max. cutter diameter | 30 mm
Cutting depth | 35 mm
Collet | 8 mm
Weight | 3.2 kg
Lpa (sound pressure) | 83 dB(A)
Lwa (sound power) | 96 dB(A)
Vibration value | <3.3 m/s2
2Ferm
10 Ferm
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable gloves and
apron to protect against sparks/debris. Wear earplugs
or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
OPERATIONAL SAFETY
Warning! Always make sure the machine is
switched off and unplugged when its not being
used, you are changing cutters or moving the work piece. See
safe work order summary section for details
Be aware: this is a powerful machine and requires two hands
to operate it.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse the cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Secure work
Use clamps or a vice to hold work. It is safer than using
your hand and it frees both hands to operate the tool. Be
aware that this router is a powerful machine; you must
use two hands to control it.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters.
Always switch off and unplug the router from the
power supply before making adjustments or chan-
ging cutters.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm2). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to pro-
vide protection against electrical shock. Do not use in
rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust or fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury. Use extension cables suita-
ble for the power input of the machine (minimum cable
size 1.5mm2). When using a cable reel unwind the cable
fully.
Ferm 3
SPARE PARTS LIST
REF NR DESCRIPTION FERM NR
01 +02 RUBBER FOOT COMPLETE 408450
03 ENCLOSURE COMPLETE 408451
05 SWITCH 408452
06 ROTOR 408243
08 STATOR 408244
09 + 10 + 11 CARBON BRUSHSET + HOLDER 408245
17 + 22 SANDING PAD COMPLETE 408453
28 FAN 408252
DUST BAG 408249
Product specificaties
| Merk: | Ferm |
| Categorie: | Freesmachine |
| Model: | FBF-8E |
Heb je hulp nodig?
Als je hulp nodig hebt met Ferm FBF-8E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Freesmachine Ferm
5 Mei 2023
20 April 2023
28 Maart 2023
5 Februari 2023
18 Januari 2023
9 November 2022
9 Oktober 2022
28 September 2022
Handleiding Freesmachine
- Freesmachine Bosch
- Freesmachine DeWalt
- Freesmachine Al-ko
- Freesmachine Alpina
- Freesmachine Bort
- Freesmachine Bruder Mannesmann
- Freesmachine Duro
- Freesmachine Einhell
- Freesmachine Elu
- Freesmachine Felisatti
- Freesmachine Festool
- Freesmachine Flex
- Freesmachine Fuxtec
- Freesmachine Gamma
- Freesmachine Gardena
- Freesmachine Grizzly
- Freesmachine Gude
- Freesmachine Hitachi
- Freesmachine Holzmann
- Freesmachine Kinzo
- Freesmachine Makita
- Freesmachine Maktec
- Freesmachine Parkside
- Freesmachine Powerplus
- Freesmachine Protool
- Freesmachine Rupes
- Freesmachine Scheppach
- Freesmachine Skil
- Freesmachine Stanley
- Freesmachine Stomer
- Freesmachine Texas
- Freesmachine Toledo
- Freesmachine Topcraft
- Freesmachine Triton
- Freesmachine Trotec
- Freesmachine Vonroc
- Freesmachine Westfalia
- Freesmachine Worx
- Freesmachine Ozito
- Freesmachine Black And Decker
- Freesmachine Meec Tools
- Freesmachine Carat
- Freesmachine Eibenstock
- Freesmachine Power Craft
- Freesmachine Truper
- Freesmachine Mafell
- Freesmachine Yato
- Freesmachine Trend
- Freesmachine CMT Orange Tools
Nieuwste handleidingen voor Freesmachine
20 Maart 2024
12 Maart 2024
12 Maart 2024
21 Februari 2024
21 Februari 2024
20 Februari 2024
7 Februari 2024
30 Januari 2024
6 December 2023
6 December 2023