Fender Tone Master Super Reverb Handleiding

Fender Gitaarversterker Tone Master Super Reverb

Lees hieronder de 📖 handleiding in het Nederlandse voor Fender Tone Master Super Reverb (12 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

OWNER’S MANUAL

MANUAL DE INSTRUCCIONES

MODE D’EMPLOI

MANUAL DO PROPRIETÁRIO

ENGLISH

TONE MASTER SUPER REVERB

The Tone Master Super Reverb amplifier uses massive digital

processing power to achieve a single remarkable sonic feat:

faithfully modeling the circuitry and 45-watt power output

of an original Super Reverb tube amp. Using a high-perfor-

mance 200-watt digital power amp to achieve the headroom

and dynamic range of a real vintage Super Reverb tube amp,

paired with the pronounced power and clarity of four Jensen®

P10R speakers and a lightweight cabinet, the result is tubeless

Super Reverb tone, volume and dynamics virtually indistin-

guishable from the all-tube original. And with all these fea-

tures, the Tone Master Super Reverb is in fact about only half

the weight of an all-tube Super Reverb.

Front panel features give guitarists a playing experience iden-

tical to the tube version, including Fender’s world-standard

reverb and tremolo effects. Additional rear-panel features

deliver modern convenience and flexibility—including an out-

put power selector for full power and five attenuated settings,

balanced XLR line output with impulse response (IR) cabinet

simulations, mute switch for silent stage or recording use, USB

port for firmware upgrades, and more.

A. NORMAL CHANNEL INPUTS: Connect instrument here.

Normal input 1 produces full sensitivity; normal input 2

has adjusted sensitivity (-6dB) for slightly darker tone and

cleaner response with high-gain instruments.

B. NORMAL CHANNEL BRIGHT SWITCH: High-frequency

boost for normal channel.

C. NORMAL CHANNEL VOLUME: Controls volume level of

both normal channel inputs.

D. NORMAL CHANNEL TREBLE: Controls treble response of

both normal channel inputs.

E. NORMAL CHANNEL BASS: Controls bass response of both

normal channel inputs.

F. VIBRATO CHANNEL INPUTS: Connect instrument here to

use built-in “vibrato” (tremolo) and reverb eects. Input 1

produces full sensitivity; input 2 has adjusted sensitivity

(-6dB) for slightly darker tone and cleaner response with

high-gain instruments.

G. VIBRATO CHANNEL BRIGHT SWITCH: High-frequency

boost for “vibrato” (tremolo) channel.

H. VIBRATO CHANNEL VOLUME: Controls volume level of both

vibrato channel inputs.

I. VIBRATO CHANNEL TREBLE: Controls treble response of

both normal channel inputs.

J. VIBRATO CHANNEL MIDDLE: Controls midrange response

of both vibrato channel inputs.

K. VIBRATO CHANNEL BASS: Controls bass response of both

vibrato channel inputs.

L. REVERB: Controls reverb eect level. No reverb is heard when

control is turned fully counterclockwise. Reverb can also be

turned on and o using included two-button footswitch.

M. SPEED: Controls “vibrato” (tremolo) eect rate.

N. INTENSITY: Controls “vibrato” (tremolo) eect

depth. No eect is heard when control is turned fully

counterclockwise. Eect can also be turned on and o

using included two-button footswitch.

O. POWER JEWEL: Illuminates red when amplier is

on; ashes between red and amber during warmup.

Illuminates amber in MUTE mode (R).

CONTROL PANEL

ENGLISH

REAR PANEL

P. IEC INLET: Connect included power cord to a grounded

outlet in accordance with the input power voltage and

frequency beside inlet. Universal 100V-240V operation.

Q. POWER: Turns amplier on and o.

R. MUTE: Mutes power amp. When in MUTE mode, XLR line

output remains active for studio or “quiet stage” use, and

POWER JEWEL (O) illumination changes from red to amber.

S. OUTPUT POWER: Selector switch oers full power (45

watts) and ve other attenuated wattage settings that tailor

room/venue overall loudness. Set amp front-panel channel

volume to personal preference for tube-emulated response,

then set OUTPUT POWER to preferred level.

T. CABINET SIM: When using XLR BALANCED LINE OUTPUT

(W), this switch oers three dierent tonal options—a at,

uncolored amp signal without speaker cabinet emulation

(OFF); and two impulse response (IR) proles emulating

dierent speaker/ microphone-placement combinations:

I Dynamic microphone close-mic’ed at edge R PROFILE 1:

of speaker cone center cap for pronounced attack and

denition. IR created using a Shure® SM57 microphone.

IR PROFILE 2: Ribbon mic, close-mic’ed for increased

smoothness and bass response. IR created using a Royer

Labs® R-121 Studio Ribbon microphone.

U. BALANCED LINE OUTPUT LEVEL: Adjusts output level of

XLR BALANCED LINE OUTPUT (W) for external devices and

systems (i.e., PA and recording gear), whether mic or line level.

V. GROUND LIFT: When using the XLR BALANCED LINE

OUTPUT (W), engaging this button may eliminate hum or

buzz resulting from connection to improperly grounded

equipment.

W. XLR BALANCED LINE OUTPUT: For balanced connection

to external devices and systems (i.e., PA and recording

gear). XLR line output remains active when amp is in

MUTE mode (R).

X. FOOTSWITCH: Connect included two-button footswitch

for reverb and tremolo on/o here.

Y. USB PORT (NOT SHOWN): For rmware updates, a USB

port is located on the underside of the chassis beneath

the OUTPUT POWER section. Visit fender.com/rmware/

support for periodic rmware updates that improve and

enhance the Tone Master experience.

All non-FMIC product names and trademarks appearing in this

manual are the property of their respective owners and are used

solely to identify the products whose sounds were studied during

IR development for this product. The use of these products and

trademarks does not imply any aliation, connection, sponsor-

ship, or approval between FMIC and with or by any third party.

For questions and troubleshooting,

contact a Fender specialist at:

--- (U.S. toll free)

--- (International)

SPECIFICATIONS

TYPE PR 5966

POWER REQUIREMENTS 450 watts (max)

POWER AMP OUTPUT 200 watts (simulates 45W tube amp performance)

INPUT IMPEDANCES Input 1 (both channels): 1MΩ Input 2 (both channels): 136kΩ

XLR LINE OUT IMPEDANCE 600Ω

SPEAKER Four 10” Jensen® P10R, 8Ω (PN 0055613000)

FOOTSWITCH Two-button Tone Master (included, PN 7716005000)

COVER Included (PN 0041533000)

DIMENSIONS AND WEIGHT Width: 25.12” (63.5 cm) Height: 24.75” (63 cm) Depth: 10.5” (26.5 cm) Weight: 36 lbs. (16.3 kg)

Product specifications subject to change without notice.

Product specificaties

Merk:	Fender
Categorie:	Gitaarversterker
Model:	Tone Master Super Reverb

Heb je hulp nodig?

Als je hulp nodig hebt met Fender Tone Master Super Reverb stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Gitaarversterker Fender

Fender '68 Custom Vibro Champ Handleiding

9 Juli 2023

Fender Mustang GTX100 Handleiding

8 Juli 2023

Fender Mustang LT50 Handleiding

7 Juli 2023

Fender Mustang GTX50 Handleiding

7 Juli 2023

Fender '68 Custom Pro Reverb Handleiding

7 Juli 2023

Fender Hot Rod Deluxe IV Handleiding

6 Juli 2023

Fender Tone Master Super Reverb Handleiding

6 Juli 2023

Fender Tone Master Twin Reverb Blonde Handleiding

5 Juli 2023

Fender ’68 Custom Twin Reverb Handleiding

4 Juli 2023

Fender Champion 40 Handleiding

4 Juli 2023

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker

Boss KATANA:GO Handleiding

10 April 2024

Fishman Loudbox Mini Charge Handleiding

8 April 2024

Blackstar Unity U500 Handleiding

8 April 2024

Blackstar HT-1RH MkII Handleiding

8 April 2024

Blackstar HT CLUB 50 MkII Handleiding

8 April 2024

DACS Audio HeadLine Handleiding

27 Maart 2024

Fishman PRO-PJA-001 Handleiding

13 Maart 2024

Hughes & Kettner Spirit Nano Series Handleiding

13 Maart 2024

Peavey Robert Randolph Signature Handleiding

12 Maart 2024

Peavey Ecoustic E20 Handleiding

12 Maart 2024