Fantini Cosmi CH175 Handleiding
Fantini Cosmi
Thermostaat
CH175
Bekijk gratis de handleiding van Fantini Cosmi CH175 (2 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.5 sterren uit 23 reviews. Heb je een vraag over Fantini Cosmi CH175 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
1 RELAY WIRELESS ACTUATOR FOR SYSTEM
The CH175 unit is an actuator module which, connected to the Intellicomfort+ wireless network, allows a remote control of the boiler or the zone solenoid-
valve. The CH175 module also provides to the wireless repeater functionality, extending the radio range of the Intellicomfort+ wireless network.
SCOPE OF DELIVERY
1 CH175 actuator, 1 two poles removable terminal block, 1 three poles removable terminal block and this installation manual.
INSTALLATION AND CONNECTION
The installation must be carried out by qualied personnel, in compliance with the requirements concerning the installation of electrical devices. Make sure
that the power network is disconnected before making any connection or working on the device.
Make the electrical connections as shown in the picture 2 or 3 with the connection diagrams examples.
Notes
WARNING:The “L1” pole of the output terminal block is connected on the PCB board with the “L” pole of the power terminal block.
To control units with “free voltage contact”, adopt the connection example of the picture 2.
To control units with “powered contact”, adopt the connection example of the picture 3.
Picture 1
Picture 2 Picture 3
TECHNICAL DATA
²
Power supply: 230Vca ±10% - 50Hz
Power consumption: 20VA max (load excluded)
Transceiver frequency: 868MHz
Relay contacts rating: 16(4)A – 250Vca
Maximum cables size: 2,5 mm²
Degree of protection: IP20;
Operating temperature: 0 ÷ 50°C;
Storage temperature: -20 ÷ +70°C;
Shape type: gray ABS plastic;
Dimensions: 36x58x90 mm. - DIN-rail (2 modules)
Responding to Directive 2014/53 / EU (RED).
5679633C
COMMISSIONING AND NETWORK INCLUSION
The CH175 actuator, after power up, will work only after the INTELLICOMFORT+ wireless network inclusion step.
For this procedure it’s necessary to use a special Programmer tool (p/n 1590880) that provides all instructions by display
messages. When required, will be necessary to touch the “X” area of the actuator with the tool (see picture 4). For more details,
please refer to the wireless INTELLICOMFORT+ system manual.
ATTENTION!
pdf.fantinicosmi.it
ATTENZIONE!
http://www.fantinicosmi.it
Product specificaties
| Merk: | Fantini Cosmi |
| Categorie: | Thermostaat |
| Model: | CH175 |
Heb je hulp nodig?
Als je hulp nodig hebt met Fantini Cosmi CH175 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Thermostaat Fantini Cosmi
18 Juli 2025
17 Juli 2025
17 Juli 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
Handleiding Thermostaat
Nieuwste handleidingen voor Thermostaat
5 Augustus 2025
4 Augustus 2025
4 Augustus 2025
31 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025