Extron FOX3 T 111 Handleiding

Bekijk gratis de handleiding van Extron FOX3 T 111 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over Extron FOX3 T 111 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FOX3 T 111 • Setup Guide

IMPORTANT NOTE:

Go to www.extron.com for the complete FOX3 T 111 user guide, installation instructions, and specications

before connecting the product to the power source.

FOX3 T 111

This guide provides quick start instructions for an experienced installer to set up and operate the Extron FOX3 T 111 ber optic

transmitter.

WARNING: The FOX3 T 111 outputs continuous invisible light (Class 1 rated), which may be harmful to the eyes; use with

caution. Plug the attached dust caps into the optical transceivers when the ber cable is unplugged.

CLASS 1 LASER PRODUCT, see the FOX3 T 111 User Guide, at www.extron.com.

AVERTISSEMENT :Le FOX3 T 111 émet une lumière invisible en continu (conforme à la classe 1) qui peut être

dangereux pour les yeux, à utiliser avec précaution. Branchez les protections contre la poussière dans l’ensemble

émetteur/récepteur lorsque le câble bre optique est débranché.

Produit laser de classe 1, voir le FOX3 T 111 User Guide sur www.extron.com (en anglais).

Installation

Step 1 — Mounting

Turn o󰀨 or disconnect all equipment power sources and mount the transmitter as required. For mounting details and

considerations, see the FOX3 T 111 User Guide at www.extron.com.

Step 2 — Input and Output Connections

OUTIN

POWER

12V

--

--

A MAX

INPUT

LOOP OUT

HDMI

A

FOX3 T 111

LAN

AAABBBCCCDDDEEE

Figure 1. FOX3 T 111 Rear Panel

a. Connect an HDMI video source to the HDMI

input (see gure 1,

B

).

b. If desired, connect an HDMI video display to

the LOOP OUT port (

C

) on the transmitter for

a local display.

NOTE:See the FOX3 T 111 User Guide

to secure the HDMI connectors with the

enclosed LockIt Plus brackets.

Step 3 — Throughput Connections

NOTE:See the image on the right for ber cable connections. Connect the transmitter (

D

) to a receiver in

one of two ways:

• One way (transmitter to receiver) only, perform step 3a.

• Two way (transmitter to receiver and return), perform steps 3a and 3b.

a. Connect the ber between the transmitter AOut port and the receiver AIn port (

1

).

NOTE:Ensure that the transmitter and connected receiver are in the same transmission mode,

singlemode (SM) or multimode (MM), and use the correct SM or MM ber cable to connect the

devices.

b. To return serial data from the receiver to the transmitter, connect a cable between the receiver A Out port and

the transmitter A In port (

2

).

SFP Link LEDs —

Receiver

T

ransmitter

11

22

22

11

A

OUTIN

A

OUTIN

• Transmit Optical OUT LED lights solid green when powered and is o󰀨 when there is no power on the endpoint.

• Receive Optical IN LED lights solid green when light is present and is o󰀨 when there is no power or light present.

1

1

Product specificaties