Extech 407760 Handleiding
Extech
Meetapparatuur
407760
Bekijk gratis de handleiding van Extech 407760 (2 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.4 sterren uit 2.5 reviews. Heb je een vraag over Extech 407760 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
407760- -US_V2.5 8/22en
User Manual
Sound Level Meter USB Datalogger - Model 407760
Introduction
Congratulations on your purchase of the 407760 Sound Level Meter Datalogger. This device
measures and stores approx. 129,920 readings. Using the supplied Windows
TM
software, the
datalogger can be configured for datalogging rate, high/low alarm limits, frequency weighting,
response time, start-mode, and other parameters. The software is also used to download the
stored data to a PC. Sound Level data can then be graphed, printed and exported to other
applications. The data logger is supplied with a long-life lithium battery. This meter is shipped
fully tested and calibrated and, with proper use, will provide years of reliable service. Please visit
our website (www.extech.com) to check for the latest version of this User Guide, Product
Updates, Software updates, and Customer Support.
Operation
This meter has the capability to connect to and communicate with a PC.
Check the software download page of the website www.extech.com/software for the latest
version of the PC software and its operating system compatibility.
Download and unzip the software. Run ExtechInstaller.exe and then refer to the instructions
provided in the HELP Utility within the software program.
Battery Replacement
When the battery is low (yellow LED blinking), replace the battery as soon as possible.
The Datalogger retains its stored readings even when the battery is discharged or when the
battery is replaced; the data logging process will however be stopped and cannot be re-started
until the battery has been replaced and the logged data has been downloaded to PC.
Use only one (1) 3.6V lithium battery (1/2 ‘AA’). Before replacing the battery, disconnect the
datalogger from the PC.
NOTE: Leaving the datalogger plugged into the USB port for longer than necessary will shorten
the battery life.
Replace battery as shown in diagrams. Observe battery polarity when installing.
407760- -US_V2.5 8/22en
Two-year Warranty
Teledyne FLIR warrants this Extech brand instrument to be free of defects in parts and workmanship
for two years from date of shipment (a six-month limited warranty applies to sensors and cables). To
view the full warranty text please visit: http://www.extech.com/support/warranties.
Calibration and Repair Services
Teledyne FLIR offers calibration and repair services for the Extech brand products we sell. We offer
NIST traceable calibration for most of our products. Contact us for information on calibration and
repair availability, refer to the contact information below. Annual calibrations should be performed
to verify meter performance and accuracy. Product specifications are subject to change without
notice. Please visit our website for the most up- -date product information: to www.extech.com.
Contact Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Calibration, Repair, and Returns: repair@extech.com
Technical Support: https://support.flir.com
Copyright 2022 Teledyne FLIR Commercial Systems, Inc.©
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com
This document does not contain any export-controlled information
Product specificaties
| Merk: | Extech |
| Categorie: | Meetapparatuur |
| Model: | 407760 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 407760 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur Extech
24 Mei 2025
24 Mei 2025
24 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
17 Maart 2025
30 Januari 2025
Handleiding Meetapparatuur
- Aim TTi
- Voltcraft
- Aktobis
- SIIG
- Vimar
- Gossen Metrawatt
- PQ Plus
- CESYS
- Motrona
- Dostmann Electronic
- Yato
- Janitza
- Lanaform
- PCE Instruments
- AkYtec
Nieuwste handleidingen voor Meetapparatuur
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025