EXSYS EX-62036MPOE Handleiding

Bekijk gratis de handleiding van EXSYS EX-62036MPOE (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over EXSYS EX-62036MPOE of wil je andere gebruikers van dit product iets vragen? Stel een vraag

LED NameColorLED Function

L/AGreen

On:Linked

Flashing:Data Transmission

PWRYellow

Steady on:Switch is powered

Off:No power supply connected

6

5

1

AUFBAU

CONNECTORS & STATUS LEDsHARDWAREINSTALLATION

Anleitun

E62036MPo

RJ45 Port:

Procedure for STP Cable Grounding

When using shielded cables to connect two Ethernet devices, a ground loop may occur if the

shielding on the cables generates an additional grounding connection path. This can cause

ground current to flow through to the Ethernet ports and damage the devices. If it is necessary

to use shielded cables, we recommend using a metallic RJ45 connector on one end and a non-

metallic connector on the other end. Alternatively, a patch panel can be used in between the

two devices to prevent ground loops from occurring.

Switch off the power supply before disconnecting modules or wires.

The propper power supply voltage is indicated on the product label. Check the voltage of your

power source to ensure you are using the correct voltage. use a voltage higher than DO NOT

what is specified on the product.

NOTICE & CLEANING

Please read the following installation instructions.

1.-- Install the EX62036MPoE on a mounting rail using the DINRail kit.

2. Connect your network devices to the switch using a network cable.

3.Connect the power connector of the optionally available power supply to the terminal block

and switch on the power supply.

4.After the power is turned on, the PWR indicator lights up. If the indicator does not light up,

check that it is connected to the power supply correctly.

5.When all cables are connected correctly, the indicators light up according to the port status

of the LEDs (page 5).

Status LEDs:

To clean the device, please use only a dry, nonfibrous cloth and remove the dirt with light -

pressure. In the area of the connections, please make sure that no fibers of the cloth are left in

the socket.

Attention! Never use a moist or wet cloth for cleaning!

MANAGEMENT

Make sure that the IP addresses of the switch and the PC are in the same network segment to

access the switch via the web. The default IP address of the switch is .192.168.1.100

Open your browser, type the switch's IP address 192.168.1.100 in the address bar and press

'Enter'.

In the user login popup window, enter the following username and password.-

Username:admin

Password:admin

After confirming your login, you will be taken to the main page of the switch, where you can

change the settings to suit your needs.

Der kompakte industrietaugliche 10Port Gigabit WebManaged PoESwitch EX62036MPoE ----

bietet trotz seiner geringen Aussenmaße volle Gigabit Leistung an allen Ports. An acht RJ45-

Ports stehen jeweils bis zu 30W für den Anschluss von PoE Powered Devices (PD) wie z.B. IP-

Kameras oder IPTelefone zur Verfügung. Die benutzerfreundliche Webbasierte Management---

Benutzeroberfläche des EX62036MPoE ermöglicht eine schnelle und bequeme Einrichtung, -

Konfiguration und Verwaltung, inklusive Konfigurationssicherungen und FirmwareUpgrades. -

Dank dem robusten Metallgehäuse und dem erweiterten Betriebstemperaturbereich von 40°C -

bis 80°C ist er für eine Vielzahl von Anwendungen auch in rauen Umgebungen geeignet. Die

Stromversorgung erfolgt über den Terminal Block oder den USBCPort (ohne PoEBetrieb). Im ---

Lieferumfang ist ein DIN-Rail Kit (vormontiert) und ein Wandmontagebügel enthalten.

BESCHREIBUNG & TECHNISCHE DATEN

Kompatibilität:Gigabit Ethernet 10/100/1000BaseT-

PoE:IEEE 802.3af/at (PoE+), Mode/Alternative A + B

Betriebssysteme:Alle Betriebssysteme

Anschlüsse:10x RJ45Buchse, 1x Terminal Block 1248VDC, 1x USBC 5VDC---

Lieferumfang:62036MPoE, DINRail Kit, Wandmontagehalterung, EX--

Anleitung

87654321

Power over Ethernet IEEE802.3af/at (PoE+)

ACHTUNG!

Bei geerdetem Minuspol der Stromversorgung

unbedingt den Technischen Hinweis auf Seite 3

beachten.

Link / Activity LEDPWR LED

ATTENTION!

Please pay attention to the correct polarity!

Never connect the power supply to the terminal block while it is

switched on!

12V to 48V TBlock:-

V -V+

PoE Budget

@48VDC@24VDC@12VDC

Total 120WTotal 90WTotal 60W

30W / Port22.5W / Port15W / Port

RJ45 Port

PinSignalPoEPinSignalPoE

Mode AMode BMode AMode B

1BI_DA+VCC+5BI_DCVCC+ -

2BI_DAVCC+6BI_DBVCC- - -

3BI_DB+VCC7BI_DD+VCC - -

4BI_DC+VCC+8BI_DDVCC - -

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I22100 Como -

www.exsys.it

12--48V TBlock für optional

erhältliches Netzteil

Betriebs LED

8x RJ45

Gigabit PoE

PoE / StatusLEDs-

2x RJ45

100/1000 Mbit/s

ResetTaste-

USBC Port-

Power supply from any approved USB power source,

e.g. USB charger, Computer USB port, USB hub... (min. 10W)

When powered via Terminal Block, the USBC Port can be used to -

power connected devices (5V, 1A max.).

5V USBC Port:-

NOTE:

PoE operation is not possible when powered via USB!

NOTE:

When powered via the terminal block, the USBC port outputs 5 V (max. 1 A).-

Product specificaties