EXSYS EX-62030MPOE-SFP Handleiding

Bekijk gratis de handleiding van EXSYS EX-62030MPOE-SFP (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over EXSYS EX-62030MPOE-SFP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

LED NameColorLED Function

L/AGreen

On:Linked

Flashing:Data Transmission

PoEYellow

On:PoE is activated

Flashing:Power Device (PD) detected

Off:No (PD) device connected

PWRYellow

Steady on:Switch is powered

Off:No power supply connected

6

5

1

AUFBAU

CONNECTORS & STATUS LEDsHARDWAREINSTALLATION

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I-22100 Como

www.exsys.it

Anleitung

Vers.1.1/21.10.25

Anleitung

EX-62030MPoE-SFP

12V to 48V T-Block:

RJ45 Port:

Procedure for STP Cable Grounding

When using shielded cables to connect two Ethernet devices, a ground loop may occur if the

shielding on the cables generates an additional grounding connection path. This can cause

ground current to flow through to the Ethernet ports and damage the devices. If it is necessary

to use shielded cables, we recommend using a metallic RJ45 connector on one end and a non-

metallic connector on the other end. Alternatively, a patch panel can be used in between the

two devices to prevent ground loops from occurring.

Switch off the power supply before disconnecting modules or wires.

The propper power supply voltage is indicated on the product label. Check the voltage of your

power source to ensure you are using the correct voltage. DO NOT use a voltage higher than

what is specified on the product.

SFP Transceivers are a Class 1 Laser/LED product.

To avoid causing serious damage to your eyes, do not stare directly into the

laser beam.

NOTICE & CLEANING

Please read the following installation instructions.

1.Install the EX-62030MPoE-SFP on a mounting rail using the DIN-Rail kit.

2.If required, insert optional SFP transceiver into the SFP slot.

3.Connect your network devices to the switch using a network cable.

4.If required, connect the fiber optic cable for the connection to the media converter or switch

to the SFP transceiver used.

CAUTION! Do not look directly into the laser beam of the fiber optic connector!

5.Connect the power connector of the optionally available power supply to the terminal block

and switch on the power supply.

6.After the power is turned on, the PWR indicator lights up. If the indicator does not light up,

check that it is connected to the power supply correctly.

7.When all cables are connected correctly, the indicators light up according to the port status

of the LEDs (page 5).

SFP slot:

ATTENTION!

SFP Transceivers are a Class 1 Laser/LED product.

To avoid causing serious damage to your eyes, do not

stare directly into the laser beam.

PoE LED

Link / Activity LED

Status LEDs:

To clean the device, please use only a dry, non-fibrous cloth and remove the dirt with light

pressure. In the area of the connections, please make sure that no fibers of the cloth are left in

the socket.

Attention! Never use a moist or wet cloth for cleaning!

PWR LED

MANAGEMENT

Make sure that the IP addresses of the switch and the PC are in the same network segment to

access the switch via the web. The default IP address of the switch is 192.168.1.118.

Open your browser, type the switch's IP address 192.168.1.118 in the address bar and press

'Enter'.

In the user login pop-up window, enter the following username and password.

Username:admin

Password:admin

After confirming your login, you will be taken to the main page of the switch, where you can

change the settings to suit your needs.

Der kompakte industrietaugliche 6-Port Gigabit Web-Managed PoE-Switch EX-62030MPoE-

SFP bietet trotz seiner geringen Aussenmaße volle Gigabit Leistung an allen Ports. An vier der

fünf RJ45-Ports stehen jeweils bis zu 30W für den Anschluss von PoE Powered Devices (PD)

wie z.B. IP-Kameras oder IP-Telefone zur Verfügung. Der SFP-Slot ermöglicht die Einbindung

in ein Glasfaser-Netzwerk. Passende SFP-Transceiver sind als Zubehör erhältlich. Die

benutzerfreundliche Web-basierte Management-Benutzeroberfläche des EX-62030MPoE-SFP

ermöglicht eine schnelle und bequeme Einrichtung, Konfiguration und Verwaltung, inklusive

Konfigurationssicherungen und Firmware-Upgrades. Dank dem robusten Metallgehäuse und

dem erweiterten Betriebstemperaturbereich von -40°C bis 80°C ist er für eine Vielzahl von

Anwendungen auch in rauen Umgebungen geeignet. Die Stromversorgung erfolgt über den

Terminal Block (12-48VDC) und kann zur Verminderungen von Betriebsausfällen auch

redundant erfolgen. Im Lieferumfang ist ein DIN-Rail Kit (vormontiert) und ein

Wandmontagebügel enthalten.

BESCHREIBUNG & TECHNISCHE DATEN

12-48V T-Block für optional

erhältliches Netzteil

Status LEDs

5x RJ45

Gigabit PoE

Status LEDs

SFP Slot

100/1000 Mbit/s

Kompatibilität:Gigabit Ethernet 10/100/1000Base-T

PoE:IEEE 802.3af/at (PoE+), Mode/Alternative B

Betriebssysteme:Alle Betriebssysteme

Anschlüsse:5x RJ45-Buchse, 1x SFP-Slot, 1x Terminal Block 12-48VDC

Lieferumfang:EX-62030MPoE-SFP, DIN-Rail Kit, Wandmontagehalterung,

Anleitung

RJ45 Port

PinSignalPoEPinSignalPoE

1BI_DA+ 5BI_DC- VCC+

2BI_DA- 6BI_DB-

3BI_DB+ 7BI_DD+VCC-

4BI_DC+VCC+8BI_DD- VCC-

87654321

Power over Ethernet IEEE802.3af/at (PoE+), Mode B

ACHTUNG!

Bei geerdetem Minuspol der Stromversorgung

unbedingt den Technischen Hinweis auf Seite 3

beachten.

Redundant power supply possible to reduce operational failure.

Both power supplies must use the same voltage!

ATTENTION!

Please pay attention to the correct polarity!

Never connect the power supply to the terminal block

while it is switched on!

V- V+V- V+

GND

PoE Budget

@48VDC@24VDC@12VDC

Total 120WTotal 90WTotal 60W

30W / Port22.5W / Port15W / Port

Product specificaties