EXSYS EX-6083 Handleiding

Bekijk gratis de handleiding van EXSYS EX-6083 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over EXSYS EX-6083 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

65

Die EX-6083 ist eine High-Speed Gigabit Ethernet PCI-Express Karte. Sie ist mit vier externen

Ports ausgestattet. Jeder Port hat einen eigenen Realtek Chip für eine optimale und schnelle

Datenübertragung. Sie unterstützt alle PCI-Express Slots von p1-x1 bis x16. Der PCI-Express Bus

unterstützt optimal die Leistung des schnellen Realtek Chipsatz. Die EX-6083 gewährleistet so

eine sichere Datenübertragung und exzellente Performance von bis zu 1Gbit/s! Im Lieferumfang

der EX-6083 ist ein Low Profile Bügel enthalten, welcher Ihnen auch einen Einbau in schmale

PC-Gehäuse bis maximal 8cm Bauhöhe ermöglicht.

1

ANSCHLÜSSE & LED‘S

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

Kompatibilität:PCI-Express p1-x1 bis x16

Betriebssysteme:Windows 98SE / ME / 2000 / XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx

Mac / Linux / UNIX / Novell

Anschlüsse:4x RJ45 Gigabit Ethernet Anschluss

Lieferumfang:EX-6083, Low Profile Bügel, Anleitung

HARDWAREINSTALLATION

DRIVER INSTALLATION

Please note the following installation instructions. Because there are large differences between the

PC’s, we can give you only a general installation instructions for the EX-6083. Please refer your

computer’s reference manual whenever in doubt.

1.Turn off the power to your computer and any other connected peripherals.

2.Remove the mounting screws located at the rear and/or sides panels of your Computer and

gently slide the cover off.

3.Locate an available PCIe expansion slot and insert the card. Make sure that the card is

plugged in correctly.

4.Then attach the card with a screw to the rear panel of the computer.

5.Gently replace your computer’s cover and the mounting screws.

Windows XP / Vista / 7 / Server 2003 & 2008R2

After starting Windows is recognizes a new “Ethernet-Controller“.First, please download the

driver from www.exsys.de or www.exsys.ch. The driver is available for your product under

“Downloads”. Open now the folder „LAN/RTL8111B-G“. Please select the folder with your

operating system and install the driver (see Picture). Follow the hardware assistant and finish

the installation. Important! Restart your PC in any case after installing the drivers.

Follow the installation instructions and complete the installation.

Windows will now install automatically you right driver for your particular operating system. After

the installation the operating system detects the card and automatically install them.

CHECK INSTALLED DRIVER

Open the >Device manager<.Now you should see at „Networkadapter“ the following new

entry's:

If you see this or a similar information the device is installed correctly.

Windows 8.x / 10 / 11 / Server 2012R2 / 2016 / 2019 / 2022

After the hardware installation, the operating system will recognize the device automatically and

install the drivers.

CHECK INSTALLED DRIVER

Open the >Device manager<.Now you should see at „Networkadapter“ the following new

entry's:

If you see this or a similar information the device is installed correctly.

DRIVER INSTALLATION

4x RJ45 Anschluss

Status LED‘s

RJ45 Anschluss:

LINK / Connected

ACT LAN DATA

Status LED´s:

RJ45 Anschluss

PinSignalPinSignalPinSignal

1BI_DA+4BI_DC+7BI_DD+

2BI_DA- 5BI_DC- 8BI_DD-

3BI_DB+6BI_DB-

Anleitung

Vers. 1.0 / 06.11.25

EX-6083

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I-22100 Como

www.exsys.it

Product specificaties