Foutcodes Esatto Vaatwasser
Hier staan 6 foutcodes uit 2 handleidingen van Esatto Vaatwasser, met de betekenis zoals die in de handleidingen staat en de modellen waarin de code voorkomt. Via een model open je de handleiding zelf.
| Code | Betekenis | Modellen |
|---|---|---|
| E1 | E1 will be displayed Water entering the dishwash- Ensure that the water supply hose is un-kinked and that the on the LED display er has exceeded the pre-set water supply tap is fully open.ook: Te lange watertoevoertijd. Oorzaak: de kraan is niet geopend, de watertoevoer is beperkt of de waterdruk is te laag. | EDW7CS, EDW6012W |
| E3 | E3 will be displayed The dishwashers on board Potential malfunction of the heating element. Try turning the on the LED display sensors have detected that appliance power o at the power point for 15 minutes beforeook: De vereiste temperatuur wordt niet bereikt. Oorzaak: storing van het verwarmingselement. | EDW7CS, EDW6012W |
| E4 | E4 will be displayed Overow. The onboard Check that your dishwasher is level, an un-level dishwasher on the LED display computer has detected a leak can trigger this alarm.ook: Overloop. Een onderdeel van de vaatwasser lekt. | EDW7CS, EDW6012W |
| E6 | E6 will be displayed Potential component failure. Try turning the appliance power o at the power point for 15 on the LED display minutes before re-starting. | EDW7CS |
| E7 | E7 will be displayed Potential component failure. Try turning the appliance power o at the power point for 15 on the LED display minutes before re-starting. If issue persists, please contact | EDW7CS |
| Ed | Communicatiestoring tussen de hoofdprintplaat en de displayprintplaat. Oorzaak: open circuit of onderbroken bedrading voor de communicatie. | EDW6012W |