Elektrobock PT14-HT Handleiding
Elektrobock
Thermostaat
PT14-HT
Bekijk gratis de handleiding van Elektrobock PT14-HT (6 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 48 mensen en kreeg gemiddeld 5.0 sterren uit 24.5 reviews. Heb je een vraag over Elektrobock PT14-HT of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6

PT14-HT
PT14-HT
PT14-HT
PT14-HT
PT14-HT
SPATIAL
THERMOSTAT
FOR CONTROL OF THERMOELECTRIC DRIVES
• radiators equipped with thermoelectric drives
• hot water underoor heating distributors with thermoelectric drives
Intended/designed for

ASSEMBLY AND LOCATION
Install the thermostat in a suitable place where its operation will not be aected by the direct ow
of warm air from the heater, sunlight and other interfering inuences. Also avoid mounting on an
exterior wall. The installation height should be approx. 1.5 m above the ground.
Installation may only be carried out by a suitably qualied person!
Installation must be carried out without voltage!
1) Switch o the main circuit breaker.
2) Unscrew the locking screw and remove the front part of the thermostat with electronics (Fig.1).
3) Attach the back of the thermostat to the wall (Fig.2).
4) Connect the wires to the terminal board, make sure that the terminals are suciently tightened
(Fig.3).
5) Attach the front of the thermostat with LCD and secure the thermostat against splitting
locking screw (Fig.4).
6) Switch on the main circuit breaker. If everything is OK, the current temperature is displayed on
the LCD.
ASSEMBLY PROCEDURE
DESCRIPTION
power indication
heating
button for
lowering the
temperature temperature switch
/
button for
raising the temperature
We recommend:
Thermoelectric actuator type NC (valve closed
without voltage), not part of PT14-HT.
Can be ordered at www.elbock.cz order no.0030.

Fig.1 Unscrew the locking screw and remove
thermostat electronics.
Fig.2 Attach the back of the thermostat
on the wall.
Fig.3 Connect the supply wires
according to the scheme.
Fig.4 Place the part with the electronics on the
bottom part and secure with a locking screw.
L
N
e.g.
SEH30.23
NOT USED
holes for installation screws
Product specificaties
Merk: | Elektrobock |
Categorie: | Thermostaat |
Model: | PT14-HT |
Heb je hulp nodig?
Als je hulp nodig hebt met Elektrobock PT14-HT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Thermostaat Elektrobock
5 Juli 2025
12 Maart 2024
11 September 2023
11 September 2023
11 September 2023
11 September 2023
11 September 2023
11 September 2023
24 Juni 2023
6 Juni 2023
Handleiding Thermostaat
- Meross
- Gewiss
- Vemer
- TFA
- Enda
- Profile
- TrickleStar
- Wallair
- STI
- OJ ELECTRONICS
- Z-Wave
- Extraflame
- Plieger
- Grohe
- 2Heat
Nieuwste handleidingen voor Thermostaat
31 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025