Elektrobock BT710-1-5 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Elektrobock BT710-1-5 (13 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 120 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
• direct heaters
• fl oor heating
• radiant panels, infra-panels
• gas and electric boilers (only with the BPT002 receiver)
Comfortable control of:
2
FUNCTION DESCRIPTION
BPT710 is a wireless thermostat (transmitter) which according to the required room
temperature controls the receiver unit, BPT001, BPT002 or BPT003, which switches
the heating device connected.
DESCRIPTION AND CHARACTERISTICS OF ELEMENTS PHOTO
BPT710 wireless thermostat (transmitter)
measures temperature in the room and controls heating according to •
the required temperature
enables setting of 7 weekly temperature programs with 6 changes per •
day
can switch up to 9 receivers (BPT001, BPT002, BPT003)•
modern design and backlit display •
BPT001 wireless receiver – under switch
receiver with switched phase (suitable for, e.g., direct heaters and •
panels)
switches the heating device by request and sends back confi rmation•
simple installation into a wiring box•
receiver statuses indicated by LED diodes on the front panel•
automatic activation in the system after a short-term power loss •
(E-EPROM)
BPT002 wireless receiver - wall
receiver with potential-free contact (suitable for boilers, etc.)•
switches the heating device by request and sends back confi rmation•
simple installation into a wiring box•
receiver statuses indicated by LED diodes on the front panel•
automatic activation in the system after a short-term power loss •
(E-EPROM)
BPT003 wireless receiver – in the socket
receiver with switched phase (suitable for. e.g., direct heaters and •
panels)
switches the heating device by request and sends back confi rmation•
simple installation into an electric socket directly•
device simply connected by inserting into the socket (suitable for •
heaters with plug outlet)
receiver statuses indicated by LED diodes on the front panel•
automatic activation in the system after a short-term power loss •
(E-EPROM)
3
BPT710 INSTALLATION
- Lift off the front cover of the transmitter acc. to Fig. 1.
- Fasten the back cover to the wall (or on the wiring box directly); see Fig. 2.
- Insert 2 x 1.5 V alkaline batteries, type AAA (not included in the packing); heed the
correct polarity!
- Fasten the front cover on the back one; see Fig. 4, 5.
- Necessity of battery exchange is indicated by the “ ” LCD symbol.
- Always use the 2 x 1.5 V alkaline batteries, type AAA! (Do not use rechargeable batteries.)
- For correct function of BPT710, activate the receivers according to the instructions
on page 7!
Note: Dispose of old batteries according to regulations for hazardous waste
treatment!
Holes for fastening
screws
Fig.3 Fig.4
Fig.2
Fig.5
Fig.1


Product specificaties

Merk: Elektrobock
Categorie: Thermostaat
Model: BT710-1-5

Heb je hulp nodig?

Als je hulp nodig hebt met Elektrobock BT710-1-5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Elektrobock

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat