Electro Harmonix Triangle Big Muff Pi Handleiding

Bekijk gratis de handleiding van Electro Harmonix Triangle Big Muff Pi (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over Electro Harmonix Triangle Big Muff Pi of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Triangle Big Muff Pi

Congratulations on your purchase of the Triangle Big Muff. It’s a faithful re-

creation of the original and dripping with vintage Electro-Harmonix DNA and

tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain

and Tone controls, this is the one that started it all circa 1969.

OPERATING INSTRUCTIONS

VOLUME Control – Sets the output level

TONE Control – Provides a range of sounds from high treble to deep bass. As

you turn the knob clockwise the treble increases and bass decreases.

SUSTAIN Control – Adjusts the amount of sustain and distortion.

Footswitch & Status LED –Use the footswitch to toggle between effect and

bypass. The Triangle Big Muff is active when the LED is lit. When the LED is off,

the pedal is in true bypass mode.

IN Jack Plug the output of your instrument or another effects pedal into the –

¼” kΩ.input jack. The input impedance presented at this jack is 122

OUT JackOUT Connect the Triangle –Big Muff’s¼” jack to the input of your

amplifier or another effects pedal. When the Triangle Big Muff is in bypass mode,

the OUT jack is connected directly to the IN jack. The output impedance is

nominally 25kΩ.

POWER

Powering the Triangle Big Muff Pi

The Triangle Big Muff Pi may be powered from a 9V battery or an optional 9VDC

AC Adapter such as the EHX9.6DC- or any Boss200

®

Ibanezor

®

style AC

adapters capable of delivering at least 3 Plug the output of the adapter into 0mA.

the 9V power jack located at the top of the pedalThe battery may be left in or .

taken out when using an AC Adapter. The current draw is approximately 2.2mA

at 9VDC.

Please Note: Using the wrong adapter or a plug with the wrong polarity

may damage your Triangle Muff Pi and void the warranty.

Product specificaties