Electro Harmonix Super Pulsar Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Electro Harmonix Super Pulsar (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 85 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
SUPER PULSAR
Stereo Tap Tremolo/Panner
Congratulations on your purchase of the Electro-Harmonix SUPER
PULSAR, one of the most advanced Tremolo/Panner effects ever put into
a guitar pedal. Super Pulsar pairs a high end, low noise, stereo, analog
signal path with full digital control bringing out the best of both worlds.
Super Pulsar boasts so many features we thought it best to list them:
Special Features of SUPER PULSAR:
ď‚· Stereo or Mono input and output for any combination of stereo/mono tremolo or
panning
ď‚· Fully analog signal path with up to 12dB Volume Boost
ď‚· Four adjustable modulation waveforms: Sine, Triangle, Pulse and R hythm
ď‚· Sine continuously varies from narrow positive peak to standard sine to wide
positive peak
ď‚· Triangle continuously varies from ramp up to symmetrical triangle to ramp down
ď‚· Pulse continuously varies its ON time from 4% to 100% of modulation rate
ď‚· 9 Rhythm patterns available, up to 16 steps each, all user programmable
 Phase control continuously varies the right channel’s phase of modulation in
relation to the left from 0° to 360°
ď‚· Wave Invert button quickly inverts modulation waveform
ď‚· Output Volume knob allows for adjustable output effect volume
ď‚· Wide modulation rate control: from 16 seconds to 230Hz
ď‚· Tap Footswitch allows you to set modulation rate or R tempo with 2 or hythm
more taps of your foot
ď‚· Tap Divide function divides down your tap tempo for faster modulation from the
same tap tempo; divides are dotted eighth note, quarter note triplet, eighth
note, eighth note triplet, 16th and 32nd notes
ď‚· Expression pedal or CV control over Rate, Depth, Shape, Phase or Volume
ď‚· External, generic footswitch input for Tap Tempo plus up to 2 other functions on
TAP/CLK IN jack or set it for external clock in
ď‚· Save and recall all knobs, settings, rhythms and tap tempo up to esets in 8pr
ď‚· True Bypass using mechanical relays
ď‚· Includes EHX9.6DC power supply
WARNING:
Your SUPER PULSAR comes equipped with an Electro-Harmonix 9.6DC-
200 power supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The
SUPER PULSAR requires 165mA at 9VDC with a center negative plug and does not
accept batteries. Using the wrong adapter may damage your unit and void the
warranty. Please do not exceed 10VDC on the power plug.
2
SUPER PULSAR QUICK START
CONNECTING YOUR SUPER PULSAR
MONO Guitar / Instrument Setup
 Use standard, mono ¼” instrument cables for all Super Pulsar audio
connections.
ď‚· Plug your guitar, or the output of the previous effects pedal, into the
MONO / L input jack.
ď‚· Connect the MONO / L output the Super Pulsar into your amplifier or into on
the input of another pedal.
MONO Input / STEREO Output Setup
ď‚· Start with the MONO Guitar setup above .
 Grab a third instrument cable and plug it into Right output. Super Pulsar’s
ď‚· Connect the third cable to a second amplifier the stereo input of a stereo-or
in guitar pedal, such as the EHX Cathedral, or use it to split your signal to in
another pedal chain.
STEREO Input / STEREO Output Setup
ď‚· Building upon the MONO in/STEREO out setup above, add a fourth
instrument cable and plug it into the Right input on Super Pulsar.
ď‚· Plug the fourth cable into a stereo source, such as a keyboard or the output
of a stereo guitar pedal, like the EHX Stereo Electric Mistress.
BASIC TREMOLO SETTINGS
Standard Sine Wave Tremolo:
VOLUME = 1 o’clock RT. PHASE = 0° WAVE =
SHAPE = 12 o’clock DEPTH = 11 o’clock RATE = 11 o’clock
ENV DEPTH = 12 o’clock ENV RATE = 12 o’clock xRATE = DIM
Chopped Tremolo:
VOLUME = 1 o’clock RT. PHASE = 0° WAVE =
SHAPE = 11 DEPTH = 10 RATE = 12 o’clock o’clock o’clock
ENV DEPTH = 12 o’clock o’clock ENV RATE = 12 xRATE = DIM
ENVELOPE CONTROLS See page 3 – for a full explanation on ENV controls.
Rate Slows As Notes Fade:
VOLUME = 1 o’clock RT. PHASE = 0 WAVE =
SHAPE = 12 o’clock DEPTH = 11 o’clock RATE = 9 o’clock
ENV DEPTH = 12 o’clock o’clock ENV RATE = 3
PRESET MODE See page 13 –for a full explanation on Presets.
Entering Preset Mode/Loading Factory Presets:
ď‚· Press and hold the MODE footswitch.
ď‚· After 2 seconds, all the LEDs in the waveform display light up.
ď‚· Release the MODE footswitch, you are now in Preset mode.
ď‚· Press and release the MODE footswitch to load and advance the presets.
CREATING YOUR OWN RHYTHM PATTERNS See page 14.–
3
KNOBS, BUTTONS, LEDs
RATE Knob –Adjusts the speed of the tremolo or pan effect. As RATE is turned
clockwise, the modulation rate increases. The RATE knob has 3 distinct ranges of
speed to choose from, please see the following xRATE button description for
more on the RATE knob’s range.
xRATE Button and LED –This pushbutton cycles through 3 range choices for
the RATE knob, one LED indicates the current selection: Slow: xRATE LED off,
Medium: xRATE LED dimly lit, Fast: xRATE LED brightly lit. The following table
details frequency range for each mode: the RATE knob’s
xRATE MODE
FREQUENCY RANGE
xRATE LED
SLOW
16 Seconds 0.28s (3.5Hz) –
OFF
MEDIUM (Factory Default)
0.5 Hz (2 Seconds) 28 Hz –
DIM
FAST (Great for Ring Mod)
4 Hz 230 Hz –
BRIGHT
DEPTH Knob –Adjusts the amount of effect. As you turn DEPTH clockwise the
tremolo or panning effect becomes more pronounced. When you turn DEPTH
down completely, to the minimum position, no effect is produced; in this setting
the VOLUME knob could be used to boost the signal, up to 12dB. As you turn
DEPTH up past 50% the overall volume of the effect increases.
ENV CONTROLS –Super Pulsar has an internal envelope follower circuit that
converts the amplitude of the notes and chords you play to a voltage that
sweeps modulation RATE and DEPTH The envelope is a very dynamic effect. .
Since it is a measurement of the volume of your playing, you control the effect
directly with your touch .
There are 2 ENV knobs: ENV RATE and ENV DEPTH. Each ENV knob works in
conjunction with their large knob counter-parts, and in the case of ENV RATE
also sweeps Tap time. Think of the larger knobs’ positions as the start and end
points of the envelope’s sweep. You should find the ENV controls react
differently based on the position of its large knob counter-part.
The center or 12 o’clock position for the two ENV controls is the off position;
there is a center-detent in this position indicating the ENV control is off.
ENV CONTROLS POSITIVE HALF:– As you turn either ENV knob clockwise,
towards the + (plus) symbol from the center-off position, the output of the
envelope follower will add to the current position of the bigger knob, as if you’re
turning the larger knob up every time you play a note. The more positive you
turn the ENV knobs, the further the envelope sweeps RATE or DEPTH When up .
you set an ENV control to its positive half, you will want to turn down the
associated large knob to a position in its lower half .


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Super Pulsar

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Super Pulsar stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd