Electro Harmonix EHX Tortion Handleiding

Bekijk gratis de handleiding van Electro Harmonix EHX Tortion (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over Electro Harmonix EHX Tortion of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

EHX TORTION

JFET Overdrive/Preamp

Congratulations on your purchase of the EHX TORTION, the most advanced and

dynamic overdrive pedal on the market today. The EHX TORTION uses analog

JFET technology to reproduce the overdrive and distortion character of a tube

amplifier, all in a compact, durable die-cast chassis. Three-band EQ and a Pre-

Gain switch hone your sound, and a footswitchable BOOST mode adds a second

channel of modern high-gain tones.

WARNING: Your EHX TORTION comes equipped with an Electro-Harmonix 9.6DC-200BI

power supply (same as used by Boss

®

& Ibanez

®

: 9.6 Volts DC 200mA). The EHX

TORTION requires 27mA at 9VDC with a center negative plug. Using the wrong adapter

may damage your unit and void the warranty. The EHX TORTION also accepts 9V

batteries, we recommend alkaline.

- MODES OF OPERATION: NORMAL VS. BOOST -

The EHX TORTION operates in two modes: NORMAL and BOOST. The NORMAL

mode uses three JFET stages for low to medium gain sounds. The volume and

gain controls for NORMAL mode are located in the top row of knobs. The boost

mode is activated with the BOOST footswitch, and adds a fourth gain stage for

modern high-gain tones. The BOOST volume and gain knobs are on the bottom

row of the controls. The volume and gain controls for each mode are completely

independent, allowing the two modes to function like two separate channels on a

tube amplifier.

- CONTROLS -

GAIN Knob – The NORMAL GAIN knob is on the top row. This knob controls the

amount of input gain when the pedal is in NORMAL mode. This knob is disabled

when in BOOST mode.

PRE-GAINSwitch This switch controls the level and tone of the initial input –

signal to the EHX TORTION. This switch has four settings. The two leftmost

settings select a lower input level, for vintage plexi tones. The two rightmost

settings are higher gain for a modern, hot-rodded sound. Each pre-gain setting

has two tone selections: Full or Tight, indicated by and . The Full setting has F T

Product specificaties