Electro Harmonix Germanium OD Handleiding

Bekijk gratis de handleiding van Electro Harmonix Germanium OD (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Electro Harmonix Germanium OD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GERMANIUM OD

Vintage Overdrive

The Electro-Harmonix GERMANIUM OD is a classic 1960’s overdrive based around a hand

selected germanium transistor. To get the best results from it please set aside some time to

practice in a quiet room…just you, your amp, and the Germaium OD. The interaction of each

control will reward you with many different flavors of exceptional vintage overdrive.

-CONTROLS-

GAIN CONTROL –

Adjusts the amount of input signal that is fed to the GERMANIUM OD. The

more the knob is rotated the harder the Germanium transistor and drive components are hit.

BIAS CONTROL –

Adjusts the current gain that is sent to the Germanium transistor. It works

together with the voltage control to attain the over all tone. The bias control works specifically with

the Germanium transistor.

VOLTS CONTROL –

Allows the user to control the amount of voltage that is applied to the

GERMANIUM OD. When the knob is set at full, 9volts is applied. When set at minimum 3 volts of

current is applied By limiting the volts applied to the pedal a number of interesting saturations can be

set up for variations in tone.

STATUS LED –

When the LED is lit; the GERMANIUM OD effect is active. When the LED is off,

the Germanium OD is in True Bypass Mode. The footswitch engages/disengages the effect.

INPUT Jack –

Connect your instrument to the input jack. The input impedance presented at the input

jack is high.

OUTPUT Jack –

Connect this jack to your amplifier. This is the GERMANIUM OD output. This

jack is connected directly to the Input Jack.

Footswitch

--

True Bypass on and off.

Product specificaties