Electro Harmonix Bender Royale MKIII Handleiding

Bekijk gratis de handleiding van Electro Harmonix Bender Royale MKIII (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over Electro Harmonix Bender Royale MKIII of wil je andere gebruikers van dit product iets vragen? Stel een vraag

POWER SUPPLY REQUIREMENTS:

Voltage: 9VDC Current: 12mA Polarity: Center-Negative

This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter

or a plug with the wrong polarity may damage the device and void the warranty. Do not exceed 12VDC on the

power plug. Power supplies rated for less than 50mA can cause the device to act unreliably.

Operating Instructions

Insert the output plug from the supplied 9VDC AC Adapter into the power jack

at the top of the Bender Royale. Connect your guitar to the INPUT jack of the

Bender Royale and the AMP jack to your amp’s input. Press the footswitch to

ensure the LED is lit. Your Bender Royale is now ready to play.

A good starting point is to set the VOLUME, FUZZ, BIAS, TREBLE, and BASS

controls to 12:00. Set the BLEND control to maximum. Further tweak the

knobs and switches to dial in your perfect setting.

Tip: To get the classic Tone Bender MKIII sound, keep the BIAS and TREBLE knobs

at noon, and the BLEND knob at maximum. Adjust other knobs to taste. The

BASS knob corresponds with the “Treble/Bass” knob on the Tone Bender MKIII.

Welcome to the Electro-Harmonix Bender Royale, our feature-rich homage to

the Tone Bender MKIII. The Bender Royale expands on the original circuit’s

controls by adding separate TREBLE and BASS knobs, as well as controls for

BIAS, FUZZ, VOLUME, BLEND, a switch to adjust clipping character, and a FAT

switch. The Bender Royale also boasts true mechanical bypass on a momentary

switch. If you’re into trashy, ripping fuzz or big, fat saturated tones, the

Bender Royale will get you there.

Product specificaties