EK Water Blocks 3831109842980 Handleiding
Pagina's 2 Engels Hardwarekoeling
Bekijk de handleiding van EK Water Blocks 3831109842980 gratis online of download de PDF. 33 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Revision 1.0. Released on 6
th
of May, 2014
Installation and mounting manual for EK-Dual DDC X-Top CSQ
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability
whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.ekwb.com for updates. Before
installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.
The barb hose fittings require only a small amount of force to screw them in; otherwise the high flow fittings might break. These fittings do not need to be tightened with much force because the
liquid seal is made using O-rings. The use of an algaecide and corrosion inhibitors is always recommended for any liquid cooling system.
STEP 1: GENERAL INFORMATION
STEP 2: PREPARING THE PUMP
Sample picture of the EK-Dual DDC X-Top CSQ without pumps.
Take your Laing DDC pump. Unscrew the screws that connect stock
top (usually you will need a Torx T20 head screwdriver) at the bottom
and put the top away as you don’t need it any more. Keep it for a
warranty reason if the pump stops working.
STEP 3: ASSEMBLING THE “EK-Dual DDC X-Top CSQ” WITH TWO PUMPS (if disassembled)
Take motor with impeller of your Laing DDC pump. Place it according to the picture. Do not forget to place back the stock O-rings into the pumps groove. Use
enclosed Allen key to secure the pumps with Four (4) M4×25 DIN 7984 and Four (4) Dumper DDC screws.
STEP 4: INSERTING THE RESERVOIR TO YOUR COMPUTER CHASSIS
EK-Dual DDC X-Top CSQ
can be mounted directly on computer chassis or into
5,25” bay drive and
occupies three (3) 5.25" drive bay expansion slots in
your computer chassis.
If you decided to mount into Bay Drive slots free three slots in case they
are already occupied with other computer components such as optical or
hard disk drives. Place the reservoir in your
5.25" drive bay
.
After
completing
STEP 5
in this manual, secure the reservoir to the drive bay
cage using the enclosed M3x4 DIN 7985 screws with Philips head
screwdriver.
M4 Dumper
Place the stock
O-rings.
M4×25 DIN 7984 screw
Dumper DDC screw
2 × DDC pump
EK-Dual DDC X-Top
CSQ
M4x4 DIN 7984 screw
M3x4 DIN 7985 screw
Product specificaties
| Merk: | EK Water Blocks |
| Categorie: | Hardwarekoeling |
| Model: | 3831109842980 |
Heb je hulp nodig?
Als je hulp nodig hebt met EK Water Blocks 3831109842980 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hardwarekoeling EK Water Blocks
EK Water Blocks 3831109869093 Handleiding EK Water Blocks EK-FC R9-290(X) Nickel 2.0 Handleiding EK Water Blocks EK-D5 Handleiding EK Water Blocks EK-UNI Handleiding EK Water Blocks EK-FC R9-290X - Acetal+Nickel 2.0 Handleiding EK Water Blocks 3831109869130 Handleiding EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 Handleiding EK Water Blocks 3831109868874 Handleiding
Alle EK Water Blocks Hardwarekoeling handleidingen
Populair in Hardwarekoeling
EK Water Blocks EK-FC R9-290X DCII Handleiding EK Water Blocks EK-FC780 GTX Ti Handleiding EK Water Blocks Elite Aurum 360 D-RGB Handleiding
Handleiding Hardwarekoeling
Nieuwste handleidingen voor Hardwarekoeling
DeepCool LS520S Zero Dark Handleiding Lian Li HydroShift II LCD-S 360TL Handleiding Thermalright Core Vision 360 Handleiding Jonsbo CR-1000V3 Handleiding Iceberg Thermal IceSLEET G4 Handleiding DeepCool LS720S Zero Dark Handleiding PCCOOLER RZ820 Handleiding Thermalright Royal Pretor 130 Ultra Handleiding Phanteks T30-140 Handleiding Thermalright Peerless Assassin 140 SE Handleiding