DV8 Offroad CCT3-01 Handleiding


Bekijk gratis de handleiding van DV8 Offroad CCT3-01 (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over DV8 Offroad CCT3-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/9
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
4RUNNER CENTER CONSOLE
AND BRIDGE
CCT3-01
TOOLS SKILL TIME REQUIRED LEVEL REQUIRED
-10mm Socket/Wrench
-#4 Allen Bit
-11/32” Drill Bit/Step Bit
-Drill
-Short Phillips Head Screw Driver
-Plastic Trim Tool
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Novice/Intermediate
- 1 (you) to 2 persons
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
- 2 Hours
Time to install this should only
take about an two hours
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 1 | Place the driver and
passenger side mounts into place and
line them up with the top of the center
console trim.
Mark the mounting holes with a sharpie,
once aligned.
Begin by unpacking all items and
inspecting for missing pieces or damage. If
you have any concerns, please contact the
company the product was purchased from.
(12) M6x15mm Bolts
(20) M6 Flat Washers
(8) M6 Serrated Nuts
HARDWARE INCLUDED
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 2 | Release the center console
trim to access the wiring harnesses
underneath.
Pull up on the center console on both
sides to release the clips holding it in
place. Use a trim piece removal tool if
necessary.
Note: If you have a knob for the 4wd shifter,
unscrew the handle by turning it counter
clockwise to remove.
STEP 3 | Disconnect the two wiring
harnesses under the center console by
pressing on the release clips.
If you have a knob for the 4wd shifter
instead of a dial there should only be one
disconnection to make.


Product specificaties

Merk: DV8 Offroad
Categorie: Niet gecategoriseerd
Model: CCT3-01

Heb je hulp nodig?

Als je hulp nodig hebt met DV8 Offroad CCT3-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden