DV8 Offroad CCT1-01 Handleiding


Bekijk gratis de handleiding van DV8 Offroad CCT1-01 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over DV8 Offroad CCT1-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
TACOMA CENTER CONSOLE
AND BRIDGE
2016-2023 (3RD GEN) TOYOTA TACOMA
TOOLS SKILL TIME REQUIRED LEVEL REQUIRED
-10mm wrench
-#4 Allen Bit
-Trim tool (optional)
-11/32” Drill Bit
-Drill
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Novice/Intermediate
- 1 (you) to 2 persons
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
- 1 Hour
Time to install this should only
take about an hour
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 1 | Line the side brackets up
against the center console of the vehicle.
You will want to focus on the top edge
of the bracket with the trim line of the
vehicle. Using a marker or punch, mark
the mounting holes of the side brackets.
The bottom of the panel should be resting
against the carpet of the vehicle.
Tip: This can be done with both sides and the
bridge assembled together, or separately.
STEP 2 | Once all holes are marked,
using a 11/32” drill bit, drill the holes only
cutting through the plastic of the center
console.
Begin by unpacking all items and
inspecting for missing pieces or damage. If
you have any concerns, please contact the
company the product was purchased from.
(10) M6x15mm Bolts
(10) M6 Flat Washers
(6) M6 Nuts
HARDWARE INCLUDED
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 3 | Once all holes are drilled,
push down on the chrome bezel just
below the shifter to release the boot.
Unscrew the shifter and set off to the side.
STEP 4 | Gripping the top of the
center console, pull up to release the clips
until the center console is free.
Note: Do not pull up all the way since there is
an electrical connection near the shifter.


Product specificaties

Merk: DV8 Offroad
Categorie: Niet gecategoriseerd
Model: CCT1-01

Heb je hulp nodig?

Als je hulp nodig hebt met DV8 Offroad CCT1-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden