DV8 Offroad CCGX-01 Handleiding


Bekijk gratis de handleiding van DV8 Offroad CCGX-01 (13 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over DV8 Offroad CCGX-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/13
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
MOLLE CENTER CONSOLE AND BRIDGE
03-09 LEXUS GX470
CCGX-01
- 4mm Allen Bit
- 11/32” Drill Bit
- 10, 12mm Wrench (For Nutsert Tool)
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Novice/Intermediate
- 1 (you) to 2 persons
Little skill level required, you can
install it by yourself, however,
assistance is highly recommended
to ensure proper tment.
- 1.5 Hour
Time to install this should only
take about an hour and half.
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 1 | Begin by loosely installing
the bridge and passenger side. Using a
#4 allen head and M6 allen head bolt with
a at washer, tighten the hardware so
that it is snug, but the bridge can still be
adjusted..
The passenger side panel will be mounted
on the side of the bridge that has the DV8
logo as shown in the picture.
Noe’s Note: The passenger side mount will
leave an open space on the center console to
allow the glove box to open properly.
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.
(11) M6x20 Allen
(11) M6 Flat Washer
(8) M6 Serrated Nuts
(6) M6 Nutserts
HARDWARE INCLUDED
LOGO
INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 2 | Loosely install the driver
side panel to the bridge using the M6
allen head bolt and a washer with a #4
allen bit.
Tighten the hardware so that it is snug,
but the bridge can still be adjusted.
STEP 3 | Place the assembly into the
vehicle with the bridge tting between the
transmission shifter and transfer case
shifter.


Product specificaties

Merk: DV8 Offroad
Categorie: Niet gecategoriseerd
Model: CCGX-01

Heb je hulp nodig?

Als je hulp nodig hebt met DV8 Offroad CCGX-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden