DLS CAD 15 Handleiding

DLS Autoradio/CD speler CAD 15

Lees hieronder de 📖 handleiding in het Nederlandse voor DLS CAD 15 (12 pagina's) in de categorie Autoradio/CD speler. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

How to install and operate

the

DLS CAD11

DLS CAD15

digital mono amplifiers

Welcome!

This owners manual is written in easy english and

uses a lot of drawings to simply the installation and

use of the above amplifier.

Your DLS amplifier must be installed correctly in or-

der to work well. This manual will show you how to

install the amplifier like a pro. Please read the entire

manual before beginning the installation.

Install the amplifier yourself if you feel confident with

our instructions and if you have the proper tools.

However if you feel unsure, turn over the installa-

tion job to someone better suited to it.

Warranty Service

This amplifier is covered by warranty, depending

on the conditions in the country where it is sold. If

the amplifier is returned for service, please include

the original dated receipt with the product.





Technical Assistance

For technical assistance ask the shop where the

product was sold or the distributor in your very coun-

try.

You can always phone the DLS Helpdesk in Sweden

+ 46 31 84 00 60 or send an e-mail to info@dls.se.

Information can also be found on our WEB-site

www.dls.se

Contents

Specifications................................ 1

Features…………………………….. 2

Installation…………………….……. 2

Tools and materials needed………. 3

Amplifier installation kit………….... 3

Routing Wires…………………….... 3

Wiring

Power and Outputs……………..…. 4

Inputs and controls………………... 5

Input level control.......................... 5

Crossovers…………...................... 5

Phase control.....………………...… 5

Bass boost control......................... 6

Remote bass level control............. 6

Speaker wiring:

Single amplifier system………….…. 6

Testing............................................. 6

Bridging two CAD11......................... 7

Bridging two CAD15........................ 8

Subwoofer connections…………….. 9

Professional tips............................... 10

Technical data.................................. 11

Trouble shooting.............................. 11

DLS Svenska AB

P.O. Box 13029

S-40251 Göteborg, Sweden

Tel: +46 31 840060

Fax: +46 31 844021

E-mail: info@dls.se

www.dls.se

DLS Svenska AB - 2007-01-10

We follow a policy of continuous advancement in

development. For this reason all or part of specifications

& designs may be changed without prior notice.

Approval of electromagnetic compatability according

to the EEC Directive 95/54/EC

E 13 CAD15 approval No: 022944

CAD11 approval No: 022495

CAD11 &15 include

RCA input and output



High level input with auto start

Continuous variable low pass crossover



Continuous variable subsonic crossover

Bass boost feature

Remote bass level control

Phase control cont. variable 0-180 degrees

Bridge mode master / slave selector

Electronic protection circuitry against

short-circuit, DC offset and thermal overload.

Installation

Before you begin the install

Before you begin you need to read the manual, to have

some tools, cables and other material available. There

is one such list of material on the following page.

Amplifier location

Important

Allow air circulation around the amplifier.

Disconnect Battery

Before starting the instal-

lation, always disconnect

the negative terminal of

the battery.

The DLS Peformance series of amplifiers have a

compact design that allows great flexibility in

mounting. You can mount it under a seat or in the

trunk.

When you select a location, do remember that the

amplifier generates a lot of heat.

Choose a location where air can circulate freely

around the amplifier. Do not cover the amplifier with

carpets or hide behind trim panels.

Do not mount the amplifier in an inverted or upside

down position.

Check all locations and placements carefully before

making any cuts, drilling any holes or making any

connections.

This is the best direction to

mount the amplifier to get

the best cooling.

CAD11, CAD15

DLS logo on amplifier cooling flange

The DLS logo on top of the amplifier is attached

with two hex. screws. The logo can be removed

and twisted 90 or 180 degrees, and then screwed

back in wanted position. The logo can be mounted

in four different ways to match your installation.

Removal of side flanges

In order to fasten the amplifier to the surface and

connect speaker and power cables, the flanges on

the sides must be removed. This is done by

loosening the hex screws on top of the amplifier.

Use a 3 mm hex key.

Remove these

screws using a 3

mm hex. key for

removal of side

flange. Remount

after fastening the

amplifier and

connection of the

speaker and power

cables.

Tools and material needed

Tools:



Flat and Phillips screwdrivers



Wire cutter



Wire stripper



Electric drill with drills



Crimping tool



Digital multimeter or test lamp



Wire brush, scraper or a piece

of an abrasive sheet to remove

paint for a good ground connection

Grease to protect the ground

connection from corrosion

Material:

Speaker wire: minimum

12 AWG = 4 mm2 for subwoofers

Sheet metal screws for mounting the

amplifier to the amplifier board and the

amplifier board to the car + some extra

for fuse holder, amplifier ground etc.



Electrical insulation tape

½ inch thick plywood or particle board for

the amplifier to be mounted upon.

Amplifier installation kit:

If available,buy an amplifier installation kit. It

contains normally all you need. This is what you

have to buy if you buy the items separately

20- 25 feet = 6- 7.5 meter power cable,

preferably AWG 0 (50 mm2 ) for CAD15 &

4AWG (21mm2) for CAD11

1 pc of ANL fuseholder to install close to the

car battery + fuse. CAD11= 150A, CAD15=

200A

20 feet of AWG 15 = 1,5 mm2 wire for

remote turn on / off cable from radio.

RCA-cable for input from radio.

- 20 feet or 5 meter for trunk installations

-12 feet or 2 – 3 meter for under seat

installations

One ring crimp terminal

for the amplifier ground connection.

Wire ties

Insulating grommet or insulating tube

Routing wires

Stereo

head unit

Professional Tip:

If amplifier installation kits are available with diffe-

rent size of power cable, chose the most heavy

power cable to improve sound quality and to allow

more amplifiers to be installed now or later.

If possible buy AWG 0 = 50 mm2 (or heavier) cable

for best performance of CAD15, or AWG4 (21 mm2)

for CAD11.

High current draw

The CAD11 / 15 are mono amplifiers with high power

output. The current draw is also high so you must make

sure that your vehicles power system (battery and

alternator) can provide all the power you need. If you

have a bad battery or alternator in can result in a poor

sound or even worse, a broken battery or alternator.

CAD11, CAD15

Product specificaties

Merk:	DLS
Categorie:	Autoradio/CD speler
Model:	CAD 15

Heb je hulp nodig?

Als je hulp nodig hebt met DLS CAD 15 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autoradio/CD speler DLS

DLS REFERENCE RA20 Handleiding

22 Augustus 2023

DLS RA 10 Handleiding

22 Augustus 2023

DLS CAD 15 Handleiding

22 Augustus 2023

22 Augustus 2023

22 Augustus 2023

22 Augustus 2023

22 Augustus 2023

Handleiding Autoradio/CD speler

Nieuwste handleidingen voor Autoradio/CD speler

Belson BS12100 Handleiding

31 Augustus 2023

Mx Onda MX1500 Handleiding

6 Augustus 2023

Belson BS12150 Handleiding

31 Augustus 2023

Belson BS11900 Handleiding

31 Augustus 2023

Belson BS11520 Handleiding

31 Augustus 2023

Mx Onda HUESCA Handleiding

6 Augustus 2023

Mx Onda BAEZA Handleiding

6 Augustus 2023

Mx Onda T825M Handleiding

6 Augustus 2023

Mx Onda T815M Handleiding

6 Augustus 2023

Mx Onda SALAMANCA Handleiding

6 Augustus 2023