DLS CA31 Handleiding
DLS
Autoradio/CD speler
CA31
Bekijk gratis de handleiding van DLS CA31 (16 pagina’s), behorend tot de categorie Autoradio/CD speler. Deze gids werd als nuttig beoordeeld door 43 mensen en kreeg gemiddeld 5.0 sterren uit 22 reviews. Heb je een vraag over DLS CA31 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
How to install and operate the DLS
Performance series CA22, CA23,
CA31, CA41 and CA51 car audio
amplifiers.
Welcome!
This owners manual is written in easy english and
uses a lot of drawings to simply the installation and
use of the above amplifiers.
Your DLS amplifiers must be installed correctly in
order to work well. This manual will show you how
to install the amplifier like a pro. Please read the
entire manual before beginning the installation.
Install the amplifier yourself if you feel confident with
our instructions and if you have the proper tools.
However if you feel unsure, turn over the installa-
tion job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending
on the conditions in the country where it is sold. If
the amplifier is returned for service, please include
the original dated receipt with the product.
Technical Assistance
For technical assistance ask the shop where the
product was sold or the distributor in your very coun-
try.
You can always phone the DLS Helpdesk in Sweden
+ 46 31 84 00 60 or send an e-mail to info@dls.se.
Information can also be found on our WEB-site
www.dls.se
Contents
Features…………………………….. 2
Installation…………………….……. 2
Tools and materials needed………. 3
Amplifier installation kit………….... 3
Routing Wires…………………….... 3
Wiring
Power and Outputs……………..…. 4
Inputs and controls………………... 5
Input level control......................... 6
Grand Bass,Crossovers………….... 6
CA 31, CA 41, CA 51 Crossovers… 7
CA 22 and CA 23 speaker wiring:
Front speakers…...……………….... 8
Subwoofer…………………………... 8
CA 31 speaker wiring:
Front speakers…...……………….... 9
Subwoofer…………………………... 9
CA 41 speaker wiring:
Four speakers…………………….... 10
Two speakers + bridged subwoofer. 10
Two way front system with
active crossovers……………………. 11
CA 51 speaker wiring:
Four speakers…………………….... 12
Subwoofer...................................... 12
Testing……………………………….. 13
Troubleshooting……………………... 13
Professional tips…………………….. 14
Specifications………………………... 15
All models include
RCA inputs
High Level input
Continuos variable low pass and/or high
pass crossover
Bass boost feature (only on CA23 & CA41)
Remote turn on / off
Automatic remote turn on/ off on high level
input without connecting any remote wire
Electronic protection circuitry against
short-circuit, DC offset and thermal overload.
Bridgeable design to direct full power to
one or two subwoofers etc.
Installation
Before you begin installation
Before you begin you need to read the manual, to have
some tools, cables and other material available. There
is one such list of material on the following page.
Amplifier location
Important
Allow air circulation around the amplifier.
2
Disconnect Battery
Before starting the instal-
lation, always disconnect
the negative terminal of
the battery.
The DLS Performance series of amplifiers have a
compact design that allows great flexibility in
mounting. You can mount it under a seat or in the
trunk.
When you select a location, do remember that the
amplifier generates a lot of heat.
Choose a location where air can circulate freely
around the amplifier. Do not cover the amplifier
with carpets or hide behind trim panels.
Do not mount the amplifier in an inverted or upside
down position.
Check all locations and placements carefully
before making any cuts, drilling any holes or ma-
king any connections.
This is the best way to
mount the amplifier to get
the best cooling.
CA22, 23, 31, 41 & 51
CA22
2 x 60 Watt RMS / 2 x 100 Watt max in 2 ohm
1x 200 Watt RMS bridged
CA23
2 x 135 Watt RMS / 2 x 200 Watt max in 2 ohm
1 x 400 Watt RMS bridged
CA31
2 x 65 Watt RMS / 2 x 90 Watt max in 2 ohm
1 x 170 Watt RMS bridged
1 x 170 W RMS on sub channel
CA41
4 x 70 Watt RMS / 4 x 125 Watt max in 2 ohm
2 x 200 Watt RMS bridged
CA51
4 x 50 Watt RMS / 4 x 80 Watt max in 2 ohm
2 x 150 Watt RMS bridged
1 x 170 Watt RMS on sub channel
All above RMS power ratings with 4 ohm load
at 13,8 Volt DC.
DLS logo on amplifier cooling flange
The DLS logo on top of the amplifier is attached
with two 1 mm hex. screws. The logo can be remo-
ved and twisted 90 or 180 degrees, and then
screwed back in wanted position. The logo can be
mounted in four different ways to match your in-
stallation.
Removal of side flanges
In order to fasten the amplifier to the surface and
connect speaker and power cables, the flanges on
the sides must be removed. This is done by
loosening the hex screws on top of the amplifier.
Use a 3 mm hex key.
Remove these
screws using a 3
mm hex. key for
removal of side
flange. Remount
after fastening the
amplifier and
connection of the
speaker and power
cables.
Product specificaties
| Merk: | DLS |
| Categorie: | Autoradio/CD speler |
| Model: | CA31 |
Heb je hulp nodig?
Als je hulp nodig hebt met DLS CA31 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autoradio/CD speler DLS
22 Augustus 2023
22 Augustus 2023
22 Augustus 2023
22 Augustus 2023
22 Augustus 2023
22 Augustus 2023
22 Augustus 2023
Handleiding Autoradio/CD speler
- Daewoo
- Sony
- Panasonic
- Axton
- Kenwood
- Lanzar
- Soundstream
- Mx Onda
- VDO Dayton
- Belson
- Toxic
- Eclipse
- Roadstar
- Fusion
- JBL
Nieuwste handleidingen voor Autoradio/CD speler
31 Augustus 2023
6 Augustus 2023
31 Augustus 2023
31 Augustus 2023
31 Augustus 2023
6 Augustus 2023
6 Augustus 2023
6 Augustus 2023
6 Augustus 2023
6 Augustus 2023