DJI Ronin RavenEye Handleiding

DJI Afstandsbediening Ronin RavenEye

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI Ronin RavenEye (8 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

DJI RONIN

2020.10v1.0

User Guide

RavenEye Image Transmission System

In the Box

Introduction

DJI RONINTM RavenEye Image Transmission System is used to transmit a wireless video signal so that users can

access the camera view remotely. When used with DJI RS 2 or DJI RSC 2, users can also track subjects with

ActiveTrack 3.0 and use remote control features. RavenEye also supports Ronin-S and Ronin-SC and can be used

separately with the camera only.

Image Transmitter × 1

USB-C to USB-C Cable (20cm) × 1

Mini-HDMI to Micro-HDMI Cable

(20cm) × 1

Cold Shoe to 1/4” Screw Adapter

× 1

Mini-HDMI to HDMI Cable (20cm) × 1

M4 Screw (10mm) × 2

USB-C Cable (40cm) × 1

Mi n i - H DMI t o Mi n i - H DMI Cable

(20cm) × 1

Allen Wrench (3mm) × 1

1. Antennas

Transmit the wireless signal.

2. HDMI Port (Mini HDMI)

For connecting to the HDMI port of the camera.

3. RSS Camera Control Port (USB-C)

For connecting to the shutter control port of the

camera when not used with DJI RS 2 or DJI RSC 2. For

connecting to the shutter control port of the camera

when not used with DJI RS 2 or DJI RSC 2 (coming

soon).

4. Battery Level Indicators

Indicate the battery level.

5. Status LED

Indicates the system status.

Installation and Connection

There are three ways to use RavenEye.

Method 1: use RavenEye with DJI RS 2 or RSC 2 (DJI RS 2 is used as an example below)

1. Attach the image transmitter to the gimbal via the cold shoe. Adjust the antennas as shown and keep them

away from motor.

2. Connect the HDMITM port of the image transmitter to the HDMI port of the camera using the provided HDMI

cable according to the camera model.

3. Connect the power/communication port of the image transmitter to the image transmission port of the gimbal

using the provided USB-C to USB-C cable.

If the cold shoe of the gimbal is not available, you can attach the cold shoe to 1/4” screw adapter with

the image transmitter and use with a device that has a 1/4" screw hole.

HDMI

4. Connect the shutter control port of the camera to the RSS camera control port of the gimbal.

6. Power Button

Press and hold to power on or off. Press six times

to reset the default Wi-Fi password to 12345678

(the battery level indicators will blink three times

when the password is successfully reset. A new

password must be set in the Ronin app). Press

and hold for 10 seconds to force shutdown.

7. Cold Shoe

For connecting to the gimbal or camera.

8. Power/Communication Port (USB-C)

For charging and communicating with DJI RS 2

and RSC 2.

9. Reserved LED

Reserved LED currently without a function.

Product specificaties

Merk:	DJI
Categorie:	Afstandsbediening
Model:	Ronin RavenEye
Kleur van het product:	Zwart
Gewicht:	126 g
Breedte:	82 mm
Diepte:	63 mm
Hoogte:	24 mm
Interface:	Draadloze RF & wifi
Compatibiliteit:	Ronin-S\nRonin-SC\nDJI RS 2\nDJI RSC 2
Aantal schroeven:	2
Geschikt voor smartphone:	Ja