DJI CP.ZM.000238 Handleiding

DJI Afstandsbediening CP.ZM.000238

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI CP.ZM.000238 (12 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
DJI FOCUS
Remote Controller
2015.12V1.0
User Manual
Legend
Important Hints and Tips
Before You Begin
The following documents have been produced to help you safely operate and make full use of
your DJI Focus:
DJI Focus Remote Controller Quick Start Guide
DJI Focus Remote Controller User Manual
Check all of the included parts listed in the
In the Box
section. Read this entire User Manual
and watch the informational on the product page of DJI’s official website (http://www.dji.
com/product/focus). Read the disclaimers and warnings to understand your legal rights and
responsibilities. If you have any questions or problems during the installation, maintenance or
use of this product, please contact DJI or a DJI authorized dealer.
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
© 2015 DJI. All Rights Reserved.
3
Introduction
The DJI Focus Remote Controller is able to control the focus and aperture of the Zenmuse X5
series gimbal and camera when connected to the Inspire 1 remote controller. It features an
OLED screen and a host of control buttons.
[11] [12]
[14]
[13]
[1]
[2]
[3]
[5]
[4]
[6]
[7]
[8]
[9]
[10]
[1] Antenna
Not used when the remote controller is
connected to the Zenmuse X5.
[2] Power Button
Press and hold for 2 seconds to power
on/off the remote controller.
[3] Communication Port
Communicates with the Zenmuse X5.
[4] Marking Ring
Used to provide marking scale.
[5] Focus Wheel
Used to adjust the lens of your camera.
[6] Micro USB Port
Used to charge or update the remote
controller.
[7] Navigation Buttons
Allows you to navigate through menu items.
[8] Quick Focus Buttons
Assign focus points to buttons A, B, C
and D for quick access.
[9] OLED Screen
Displays the menu, system status and
battery level.
[10] Stiffness Control
Adjusts the stiffness of the focus wheel.
[11] System Status Indicator
Indicates the system status of the remote
controller.
[12] [13] Hard Stop Screws
Adjustable hard stops to limit the travel
range of the focus wheel.
[14] Backlight
Illuminates the marking ring from behind.


Product specificaties

Merk: DJI
Categorie: Afstandsbediening
Model: CP.ZM.000238
Kleur van het product: Zwart
Gewicht: 745 g
Breedte: 153 mm
Diepte: 86 mm
Hoogte: 90 mm
Interface: RF Draadloos
Maximumbereik: 100 m

Heb je hulp nodig?

Als je hulp nodig hebt met DJI CP.ZM.000238 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afstandsbediening DJI

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening