Dito Sama 600092 Handleiding
Dito Sama
Niet gecategoriseerd
600092
Bekijk gratis de handleiding van Dito Sama 600092 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Dito Sama 600092 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
GB
2.1
1.1
2.1
Contents
Introduction 1
Installation 1
Use, safety 3
Cleaning and hygiene 5
Fault nding 6
Maintenance 7
Conformity with regulation 8
Introduction
1.1 DESCRIPTION
• These 11.5 and 17.5 litre capacity cutters are machines de-
signed for cookery professionals for mincing, mixing, emulsifying,
liquidising, kneading, etc. and can be used to process all types of
foodstus (meat, vegetables, fruits, condiments, pastry, mayon-
naise, etc.).
• For special preparations other than foodstus, PLEASE ASK
US FOR DETAILS.
A Motor cover
B Removable funnel
C Removable lid arm assembly
D Transparent BPA-free tritan lid
E Stainless steel bowl
F Bowl locking knob
G Bowl locking clamps
Installation
2.1 DIMENSIONS - WEIGHT (FOR INFORMATION ONLY)
- Dimensions of packaging: (L x l x h) mm:
. 11,5l -17,5 modelx : 795 x 515 x 805 mm
. Optional table: 750 x 600 x 200
- Overall dimensions (mm):
2.2 LOCATION
• These machines are designed to be tted onto a work top (table,
base, etc.) of between 400 and 900 mm in height. The four feet
ensure that it remains perfectly stable.
• A stainless steel mobile table is available in option for the
cutters.
This document is to be used in conjunction with the original manufacturer’s manual.
The symbols correspond with the numbered drawings of the original manual.
04/2024
H Body
I Fascia
J Mains power switch
(17.5l model only)
K Stainless steel housing
L Rubber feet
Introduction
The User Manual contains useful information for the user on how
to work correctly and in complete safety, and is designed to make
it easier to use the machine (called «machine» or «appliance»
below).
What follows is in no case intended to be a long list of warnings and
constraints, but rather a series of instructions meant to improve the
service provided by the machine in every respect, and particularly
to avoid a series of injuries or damage to equipment that might
result from inappropriate procedures for use and management.
It is essential that all the people responsible for transporting,
installing, commissioning, using, maintaining, repairing or dis-
mantling the machine should consult this manual and read it
carefully before proceeding with the various operations, in order
to avoid any incorrect or inappropriate handling that might be
result in damage to the machine or put people’s safety at risk.
It is just as important that the Manual should always be available
to the operator and it should be kept carefully where the machine
is used ready for easy and immediate consultation in case of any
doubt, or in any case, whenever the need arises.
If after reading the Manual, there are still any doubts concerning
how to use the machine, please do not hesitate to contact the
Manufacturer or approved After Sales Service provider, who is
constantly available to ensure quick and careful service for im-
proved machine operation and optimum eciency.
Note that the safety, hygiene and environmental protection stan-
dards currently applicable in the country where the machine is
installed must always be applied during all phases of machine
operation. Consequently it is the user’s responsibility to ensure
that the machine is operated and used solely under the optimum
safety conditions laid down for people, animals and property.
- Gross weight when packaged : 11,5/17,5: 73/83 kg
- Net weight: 11,5/17,5: 59/69 kg
1 K120/180 GB 07 2018
ATTENTION!!
Machine storage: -25°C to +50°C
Ambient temperature during operation: +4°C to +40°C
This machine is for professional use and must be used by sta trained to use, clean and maintain it, in terms or reliability and safety.
Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard
EN 12464-1)
When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the
lower limbs.
The machine is not designed for use in explosive atmospheres.
The reference language for these instructions is French.
K120/180 GB 04 2024 2
Connection to the electrical power supply must be done according to proper professional practice by a qualied and authorised
person (see current standards and legislation in the country of installation).
If an adapter is used on the socket, a check must be made that the electrical characteristics of this adapter are not lower than
those of the machine.
Do not use multiple plugs
The AC power supply to the machine must comply with the following conditions EN60204-1;
- Maximum voltage variation: ±10%
- Maximum frequency variation: ±1% on a continuous basis, ± 2% over short periods
ATTENTION: the electrical installation must comply (for design, creation and maintenance) with the legal and standard
requirements in the country where used.
- Before connecting the machine to the electrical power supply, check that the voltage of the electrical system is the same as that
marked on the rating plate.
- The machine’s electrical power supply must be protected against voltage surges (short-circuits and excess voltages) using
a circuit breaker compliant with IEC60947-2 properly sized, of the appropriate gauge relative to the place of installation and
machine specications - see the specications shown in column G of gure 2.3a
ATTENTION: Concerning protection against indirect contact (depending on the type of power supply provided and
connection of the exposed conductive parts to the equipotential protection circuit), refer to point 6.3.3 of EN 60204-1
(IEC 60204-1) with the use of protection devices for automatic shut-o of power in the event of an insulation fault with
a TN or TT system, or, for the IT system, with the use of a permanent insulation or dierentials controller for automatic
shut-o. The requirements of IEC 60364-4-41, 413.1 must apply for this protection.
For example: in a TN or TT system, a dierential circuit breaker must be installed upline of the power supply, with a
suitable power cut-o (e.g.: 30 mA) on the earthing installation for the place where it is planned to install the machine.
ATTENTION: Failure to comply with these instructions means the customer runs the risk of machine failure and/or acci-
dents due to direct or indirect contacts.
ATTENTION !!
2.3 ELECTRICAL CONNECTION
2.3a
• The 11,5 and 17,5 litre cutters are only available as standard in
three phase, single voltage versions, with two speeds. The 11,5
litre model is also available in single phase supply with speed
variation.
• Motor characteristics:
A Motor code
B Number of phases (3 three phase)
C Nominal voltage in volts (value, range or commutation)
D Frequency (Hertz)
E Motor speed (rpm)
F Nominal power (Watts)
G Nominal current (Amperes)
H Rating of fuse for protecting the electrical line (Amperes)
I Indicative electrical consumption (kWh)
a) Three phase, single voltage 2 speed motor
• Provide an accessible wall-mounted power outlet standardized
with 3 poles + Ground, rated 20 A compliant with IEC60309, and
a corresponding waterproof plug to be mounted on the power
cord.
- If it is turning in the wrong direction, change over the two phase
wires of the plug.
b) Three phase, single voltage one speed motor with fre-
quency variator
• The cutter is supplied with a single phase current up to its
variator, which transforms the current to supply the three phase
motor.
• Provide an accessible standardized wall outlet with 2 poles
+ ground, rated at 10/16A in accordance with IEC60309, and a
corresponding waterproof plug to be installed on the power cord.
•
Check that the mains voltage matches that on the rating plate.
• Check the direction of rotation of the rotor at both speeds:
- Turn the mains power switch (depending on model) in a clo-
ckwise direction to the position.I
- Press button (pulse operation) (see § 3.1).J
- Check the direction in which the rotor is turning through the
transparent lid (anti-clockwise - as per the arrow marked
on the rotor handle).
The machine must be earthed with the green and yellow wire.
Note: The machine can only be used on TN (earthing to
neutral) and TT (earthed neutral) type supplies. Where a
machine has to be installed on an IT (impeding or isolated
neutral) supply, there is a solution which consists of inserting
an isolating transformer and locally putting on the machine
on TN or TT supply.
The machine must be earthed with the green and yellow wire.
No earth plug = no protection = risk of breakdown.
• Warning to the installer:
This cutter with electronic speed variation is equipped with a lter
built into the variator which earths any system interference without
passing through the variator. In order to be eective, the installation
must have a good quality earth, otherwise the interference could
pass through the variator and damage it.
Damage caused by inadequate earthing is not covered by
the guarantee.
Note: The earth values are dened according to the residual
dierential current and must be checked by an electrician.
In certain circumstances depending on the sensitivity of the
protective cut-outs, it may be necessary to install SI-type
(super immunity) devices to prevent untimely triggering.
To PAT test the Electrolux Range of Food Preparation Equipment,
the PCB board needs to be disconnected before any test is done.
This is due to the fact that the boards are tted with a grounding
diode that can give incorrect result during such a test. Also on a
standard appliance a ash test of 25 amps and up to 3000v is
used but, as you would expect, to use this on equipment, which
has a printed circuit, board would be quite destructive to that
board. We would recommend the use of a PAT tester approved
for computer systems which use a lower rate of amps.
The appliance is perfectly safe and is CE certicated. There are
two ways to get overcome this problem.
· Disconnect the board as instructed and test using test for PC’s,
· Or install the mixer on a fused spur (no plug) as this takes it
away from being a portable appliance and the PAT test is then
not needed.
Use, safety
Clean the machine properly prior to its rst use
This machine is for professional use and must be used by sta trained to use, clean and maintain it, in terms or reliability and safety.
Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard
EN 12464-1)
When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the
lower limbs.
Uncontrolled closure of the lid or ram press involves a risk of crushing the ngers.
ATTENTION :Risk of burning .During operation hot liquides can be splashed arround the cover by centrifugation.
It is forbidden to open the cover during the job.Stop the machine and check the total stopping of the nives before
opening the cover.
Never put a hand for insertion area while the machine is in operation; risk of injury. It is strictly forbidden to put the safety systems
out of action or modify them: Risk of permanent injury!!!!
Check that the safety devices operate correctly each time before using (see paragraph on «safety system adjustments»).
Never put a hand, a hard or frozen object in the appliance
For health and safety reasons, always use a washable or disposable strong head covering that covers the hair completely.
ATTENTION: All operations, whether using, cleaning or maintenance, present risks of cuts; never force and always keep
hands a reasonable distance from cutting edges.
Always use appropriate protective equipment when carrying out these operations.
The machine is not designed for use in explosive atmospheres.
ATTENTION !!
3.1
3.1 USER SAFETY IS ENSURED BY:
- User safety is ensured by the following features:
- The motor stops when the lid is unlocked
- The bowl and lid must be locked before the appliance can start
- After a stop, the «start» button must be operated («no voltage»
feature)
- The motor is halted by a brake before the rotor can be accessed
(models with 2 speeds only)
- Continuous action operation to control the progress of the
preparation.
- The standardised size of the lid spout allows products to be
added in mid-cycle.
- The design of the bowl (leak prevention tube).
- The bowl, lid and rotor are easy to dismantle for cleaning.
- CONTROL PANEL
A,B,E : timer
C : stop button
D : start button
F : increased speed button
G : lower speed button
H : speed indication lamp
I : high speed position II
J : pulse operation button
F-G : variable speed model
- The cutters can be started if:
- the lid is correctly locked onto its 4 clamps
- the lid has been lowered and locked.
- the mains power switch (K 180 model) is in the start position
a) Continuous operation: I – II
- Select ------ on E A by pressing and holding button .
- Start by pressing button D I or button .
- For the VV model, the speed can be increased or lowered during
operation or when stopped by operating the or buttons.F G
- Stop by pressing button C.
Always start in low speed then change to a higher speed
once the texture of the product changes.
3 K120/180 GB 12 2011
Product specificaties
| Merk: | Dito Sama |
| Categorie: | Niet gecategoriseerd |
| Model: | 600092 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dito Sama 600092 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Dito Sama
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
Handleiding Niet gecategoriseerd
- Puky
- Teltonika
- Globe
- OvisLink
- PoolSkim
- Vicks
- Polsen
- X Rocker
- Alpha Tools
- KEF
- M-Audio
- CDN
- Knog
- Thule
- Furman
Nieuwste handleidingen voor Niet gecategoriseerd
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025