Delta Dore Tybox 157 Handleiding

Bekijk gratis de handleiding van Delta Dore Tybox 157 (2 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 56 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over Delta Dore Tybox 157 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

www.deltadore.com

AUTO

TYBOX 117 - 127 - 137 - 147 - 157

08/19

> 5s

PROG

x1

PROG

x7

Important product

information ()❹

1

31

1

12

0

23

0

59

2012 ...

1

2

3

4

5

8

9

10

11

12

6

7

EXIT

5°C

30°C

5°C

30°C

5°C

16°C

3

2

4

5

6

7

8

9

EXIT

1

6h 8h24h0h17h23h

h (ON)

023

4

5

i

6h 8h0h0h17h23h15h30

5°C

30°C

2

3

1

Press me

Room temperature

Set-point temperature

Daily programming

Weekly programming

Time setting

Turn the selector dial to .

The days ash.

Press + or - to select the day, then press OK

to conrm and move on to the next setting.

Repeat the process to set

the hours and minutes.

Adjusting the

Comfort

setting (from 5

to 30°C in 0.5°C

increments)

Conrm

Conrm

Conrm ConrmAdjusting the

Economy setting

(from 5 to 30°C in

0.5°C increments)

Adjusting the

Frost

Protection setting

(from 5 to 16°C in

0.5°C increments)

To exit the mode,

turn the selector dial.

In automatic mode, manual override can be used to switch

from Comfort to Economy (or vice versa) until the next change

of programme

If you wish to cancel the override that is currently

active, press the button again.

At 5pm, the programme will return to the normal

schedule.

E.g.: it is 15:30 and you would like to switch to

Comfort mode before the set time (17:00).

Press the buttonOverride currently active

In AUTO mode, pressing the i button displays the room temperature or the temperature setting,

depending on the conguration during installation.

Set-point Temperature Setting

Manual modeOverride

Operating hours counter (boiler)

Room temperatureSet-point temperature

Information button

Interval before maintenance

of the boiler

Return to

automatic mode

Turn the selector dial to AUTO.

Your thermostat follows the programme.

Depending on the conguration during installation,

your device will constantly display the temperature

setting or the room temperature. To change these

settings, refer to the»installation guide» or contact

your installation engineer.

This mode is used to choose a set-point

temperature that remains constant.

Turn the selector dial to .

To cancel the current manual mode, turn the

selector dial.

Product specificaties