CTA Digital PAD-CGSH Handleiding

Bekijk gratis de handleiding van CTA Digital PAD-CGSH (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over CTA Digital PAD-CGSH of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Compact Mobile Gooseneck Floor Stand with Handle

PAD-CGSH

INSTALLATION - MANUAL

INSTALLATION:

CONTENTS:

A

x1

x1

x2

B

x1

13mm wrench

C

x4

D

Allen Key

5x30x80mm

x1

E

x1

F

Spring Washer

M8 mm

x4

G

Cap Nuts

M8 mm

x4

H

Nuts

M5 mm

x4

I

Washer

M6x12x1mm

x8

J

Screw

M5x25mm

x4

K

L

Allen Key

2. Base to Body Assembly

1. Installing the Wheels

Wheel

Screw Nut Cover

Spring

Washer

Metal

Base

1A. Place spring washer (G) over the

screw bolt on the wheel (D).

1B. Place the screw of the wheel (D)

through the metal base. Place nut cover

(H) over the top after. Screw nut to wheel

using hand and use provided wrench to

tighten. (C)

1C. Screw nut to wheel using hand

initiallly rotating clockwise and follow up

by using provided wrench to securely

tighten as seen above. (C)

2A. To start, first place the

metal base pieces (B) in a

cross position and align the

holes on the base. One of

the metal pieces will be

slighty higher at the middle,

so that piece will be on top

E

K

J

J

I

2B. Assemble all the

different components

illustrated to the left.

Insert the screw bolt (K)

through all of them in the

corresponding order as

shown. Using your hand

to initially rotate in the

screw while your other

hand is holding the hex

nut (I). Afterwards, use

the provided allen key

tool to securely tighten.

Repeat for all (4) holes in

the same manner.

2B. Press the wheel lever up

or down to place wheels in

locked or unlocked mode

depending if you want to be in

a mobile or stationary setup.

Make sure you adjust all (4)

wheels at the same time or it

won’t properly be setup.

MNO

x2x1x1

Product specificaties