Conair GSP1 Handleiding

Conair Niet gecategoriseerd GSP1

Lees hieronder de 📖 handleiding in het Nederlandse voor Conair GSP1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

TO PRESS TWO SIDES AT ONCE

You can take advantage of

the two heated aluminum

plates on the interior of the

unit to simultaneously press

two sides of a garment.

5. If plates are locked,

unlock them by sliding

the lock button to the unlocked position. Use

caution as the plates may be hot.

6. Place a section of your garment between the

two heated plates, trapping it by squeezing

the middle of the unit so that the plates

come together. While maintaining the tension,

slowly pull the unit to the edge of the

garment. At the edge, release the pressure

on the handle and repeat the process on

additional sections of the garment until

wrinkles are removed. It may be necessary

to repeat the process on certain sections to

achieve the look you want.

The slower you pull, the fewer passes your

garment will require.

TO STEAM

7. With the unit unplugged and cool, remove the

water tank by gripping it and pulling straight out.

8. Add cold distilled or purified water to water

tank until it is fully filled (up to 50 ml).

9. Return the water tank back to the unit.

10. Plug in the unit and press the power button.

The white Power/Ready Indicator Light will

blink for 30 seconds and then become solid

when appliance is ready to use.

11. Press the Normal Steam button and a

regular amount of steam will come out of

the plates. For tough wrinkles, press the

Turbo Steam button for turbocharged steam.

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER – Any appliance is electrically

live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after use and before cleaning.

2. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

3. Do not place in or drop into water or

other liquids.

4. Do not reach for an appliance that has fallen

into water. Unplug immediately.

5. Use only in a dry area.

KEEP AWAY FROM WATER

SAFETY PRECAUTIONS

WARNING – The polyethylene bags

over the product or its packaging may be

dangerous. Keep these bags out of the reach of

babies and children.

Never use bags in cribs, children’s beds,

strollers, or playpens. The thin film may cling to

the nose and mouth and prevent breathing.

A bag is not a toy.

WARNING – Do not use this

appliance near bathtubs, showers, basins,

or other containers filled with water.

1. Use appliance only for its intended use.

2. To reduce the risk of electric shock, do not

immerse the appliance in water or other

liquids.

3. Do not operate appliance with a damaged

cord, or if the appliance has been dropped

or damaged. To reduce the risk of electric

shock, do not disassemble or attempt to

repair the appliance. Take it to a qualiﬁed

service person for examination and repair.

Incorrect reassembly or repair could cause

a risk of ﬁre, electric shock, or injury to

persons when the appliance is used.

4. Do not use the unit if it has fallen or if it

appears to be damaged.

5. Close supervision is necessary for any appliance

being used by or near children. Do not leave

appliance unattended while plugged in.

6. Unplug the unit immediately if you have

problems when using it.

7. Unplug the unit after each use and before

filling or cleaning it.

8. This unit is not intended for use by people

(including children) with reduced physical,

sensory, or mental capabilities, or by persons

who lack experience or knowledge, unless

they are supervised or have been given

instructions beforehand on the use of the

unit by a person responsible for their safety.

Children should be supervised to make sure

they do not treat the unit like a toy.

9. Allow the unit to cool before storing.

10. Do not allow cord to touch hot surfaces. Let

appliance cool completely before putting

away. Loop cord loosely around appliance

when storing.

11. When emitting steam, this appliance may

cause burns if it is used too close to the

skin or eyes, or if it is used incorrectly.

To reduce the risk of contact with hot

water emitting from the steam vents, test

appliance before use by holding it away

from the body.

12. Do not steam, iron or press garments while

a person is wearing them.

13. Burns could occur from touching hot metal

parts, hot water, or steam. Use care when

you turn a steam appliance upside down –

there may be hot water in the reservoir.

14. Do not operate steamer without correctly

filling the water tank. Only use clean

cold water for filling this appliance. We

recommend the use of distilled or purified

cold water only.

15. To reduce the likelihood of circuit overload,

do not operate another high-wattage

appliance on the same circuit.

16. Use of an extension cord is not

recommended. If an extension cord is

absolutely necessary, a 13-ampere cord

should be used. A cord rated for less

amperage may overheat. Care should be

taken to arrange the cord so that it cannot

be pulled or tripped over.

17. Never yank cord to disconnect from outlet,

instead, grasp plug and pull to disconnect.

18. Use caution when carrying steamer, as it

may contain hot water.

GETTING TO KNOW YOUR STEAMER

Locking

Button

Power

Button/Ready

Indicator

Light

Normal Steam

Button

Turbo Steam

Button

Exterior Ceramic-Coated

Aluminum Plates

for Ironing

Removable

Water

Reservoir

19. Always disconnect appliance from electrical

outlet when ﬁlling with water or emptying,

and when not in use.

20. To reduce the risk of electric shock, this

appliance has a polarized plug (one blade

is wider than the other). This plug will ﬁt in

a polarized outlet only one way. If the plug

does not ﬁt fully in the outlet, reverse the

plug. If it still does not ﬁt, contact a qualiﬁed

electrician to install the proper outlet. Do not

change the plug in any way.

NOTE: When first using the device, it is

recommended to test it on an old cloth or to

operate the steamer for 5 minutes, as there

may be sediment left from the manufacturing

process. Then unplug the unit and allow it to

cool. Empty container and refill before actually

using on your garments.

SAVE THESE

INSTRUCTIONS

IMPORTANT

FOR HOUSEHOLD USE ONLY

OPERATING

INSTRUCTIONS

GETTING STARTED

1. Plug the unit into an

outlet. Make sure that

no other high-wattage

appliances are plugged

into the same circuit.

2. Turn on by pressing the

power button. The white

indicator light will blink for 30 seconds and

then become solid when appliance is ready

to use.

WARNING: When pressing and ironing delicate

fabrics, we recommend moistening the fabric

beforehand or putting a damp cloth between

the unit and the fabric. To avoid staining, do not

moisten silk or synthetic fabrics.

TO IRON

3. Lay your garment on a

flat surface.

4. Use the unit in the locked

position (plates closed)

for ironing. Squeeze the

middle of the unit to close

the plates. Slide locking

button to locked position.

Use caution as the plates may be hot. Position

the unit over the area to be pressed and press

down using short strokes.

Interior

Ceramic-Coated

Aluminum Plates

for Pressing Two

Sides at Once

12. Hang up the garment and position the

closed/locked unit with the exterior ceramic

plates facing the area to be steamed.

Move the unit back and forth in slow, short

movements without touching the material.

Repeat until wrinkles have been removed.

13. Press the Normal or Turbo Steam button

again to stop the flow of steam.

TO STEAM IRON OR STEAM PRESS

14. To add the power of steam while ironing or

pressing, just follow steps #7, #8, #9, and

#10 prior to ironing or pressing and steps

#11 and #13 while ironing or pressing.

STEAMING TIPS

CAUTION: First, test unit on an inconspicuous

area of the item to be steamed to ensure fabric

can tolerate its effect. If there is no evidence of

damage, you may proceed to use the steamer

on that item.

1. Hang up the garment or fabric item.

NOTE: Avoid using metal clothes hangers,

if possible.

2. Hold fabric taut with one hand and the

steamer with the other. Pass the steam

jets just above the wrinkled fabric. It may

take a few passes to remove the wrinkles

completely. CAUTION: If garment is to be

steamed while hanging on a door, use

caution by protecting the door from potential

damage that could be caused by the steam.

3. After use, turn off the steam button, then

the power button. With dry hands, unplug

your Steam Stylist from the outlet. BE SURE

TO PRESS THE POWER BUTTON PRIOR TO

UNPLUGGING THE UNIT. Carefully empty

any remaining water from the tank to avoid

leakage.

23PA068818 IB-17948

Service Center

Conair LLC

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair

® product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

Made in China

Due to continuing product improvements,

the actual product purchased may differ

slightly from the one shown.

CONAIR GARMENT

STEAMING ACCESSORIES

(sold separately)

Steaming Mitt

Model GPP1

Fabric Shaver

Model CLS1X

Door Press Pad

Model GDPP1

INSTRUCTION BOOKLET

For your safety and continued enjoyment

of this product, always read the instruction

book carefully before using.

ALL GSP1 MODELS

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 12 months from the date

of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed, together with your purchase receipt.

California residents need only provide proof

of purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 12-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you. This

warranty gives you specific legal rights, and

you may also have other rights, which vary

from state to state.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device

must accept any interference received,

including interference that may cause

undesired operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there

is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

SUPPLIER’S DECLARATION

OF CONFORMITY

Brand: Conair®

Model No.: GSP1

Description: Steamer and Iron

Responsible Party: Conair LLC,

1 Cummings Point Road, Stamford, CT 06902

(203) 351-9000

Standards: FCC Part 15 Subpart B, ANSI

C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) This device must accept

any interference received, including interference

that may cause undesired operation.

DATE OF ISSUE: 03/03/2023

CLEANING

Please Note: Before cleaning the Steam Stylist

in any way, make sure that the appliance plug

is not connected to an outlet. Any deposits

or starch residue left on the plates can be

removed using a damp cloth or a nonabrasive

liquid detergent after the plates have cooled.

Avoid scratching the plates with steel wool

or metallic objects. The plastic parts of the

appliance can be cleaned with a damp cloth,

then wiped with a dry cloth.

HOW TO STORE

• Disconnect the plug of the Steam Stylist from

the wall outlet.

• Let the unit cool down completely.

• Remove the water reservoir and empty any

remaining water. Do not return the reservoir

to the unit until it's completely dry.

Product specificaties

Merk:	Conair
Categorie:	Niet gecategoriseerd
Model:	GSP1

Heb je hulp nodig?

Als je hulp nodig hebt met Conair GSP1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Conair

Conair CD117NN Handleiding

9 April 2024

Conair LLT2 Handleiding

9 April 2024

Conair CLS1X Handleiding

9 April 2024

Conair LT85 Handleiding

9 April 2024

Conair HS79 Handleiding

9 April 2024

Conair PG1000L Handleiding

9 April 2024

Conair FR02 Handleiding

9 April 2024

Conair WJX01 Handleiding

9 April 2024

Conair GSP1 Handleiding

9 April 2024

Conair HP15XF Handleiding

9 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024