Chef's Choice Diamond Hone 2000 Handleiding
Chef's Choice
Messenslijper
Diamond Hone 2000
Lees hieronder de đ handleiding in het Nederlandse voor Chef's Choice Diamond Hone 2000 (12 pagina's) in de categorie Messenslijper. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
instruction manual
Commercial
Diamond HoneÂŽ Knife Sharpener 2000
Read instructions before use.
It is essential that you follow these
instructions to achieve optimal results.
2
imPortant saFEGuarDs
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the ChefâsChoice
ÂŽ motor drive
section in water or other liquid.
3. Make sure only clean knife blades are inserted in the ChefâsChoice
ÂŽ Model 2000.
4. Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraftâs factory for service where
the cost of repair or electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced by the ChefâsChoice
ÂŽ
distributor or other qualiďŹed service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of
repair or electrical or mechanical adjustment can be estimated. If the supply cord of
this appliance is damaged, it must be replaced by a repair facility appointed by
the manufacturer because special tools are required. Please consult your local
ChefâsChoiceÂŽ distributor.
7. CAUTION! âThis appliance may be ďŹtted with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will ďŹt in a polarized outlet only
one way. If the plug does not ďŹt fully in the outlet, reverse the plug. If it still does not ďŹt,
contact a qualiďŹed electrician. Do not modify the plug in anyway.â
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause
ďŹre, electric shock or injury.
9. The ChefâsChoiceÂŽ Model 2000 is designed to sharpen kitchen knives (including ser-
rated knives), pocket knives and most sports knives. Do not attempt to sharpen âparrot
beakâ knives, scissors, ax blades or any blade that does not ďŹt freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the âONâ position (Red ďŹash on switch is exposed when âonâ) the
ChefâsChoiceÂŽ should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR CHEFâSCHOICE
ÂŽ WILL BE SHARPER
THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH EXTREME CARE.
DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND OR BODY. DO NOT RUN
FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Close supervision is necessary when any appliance is used by or near children.
15. Do not use honing oils, water or any other lubricant with the ChefâsChoice
ÂŽ.
16. SAVE THESE INSTRUCTIONS.
Congratulations on your selection of
the ChefâsChoiceÂŽ Commercial Knife
Sharpener Model 2000!
You will ďŹnd this method of sharpening puts an exceptionally sharp and durable edge on all
of your knives. It is backed by EdgeCraftâWorld Leader in Cutting Edge Technology
ÂŽ.
The ChefâsChoiceÂŽ Commercial Diamond HoneÂŽ Knife Sharpener Model 2000
incorporates advanced diamond abrasive and honing technology to produce the sharpest
and most durable edges of any sharpener available today. With it you can develop a
shaving-sharp edge on all your knives. Once your knives have been sharpened on the
Model 2000, resharpening takes less than 1 minute.
Consequently, if the Model 2000 is conveniently located in your work area, you can
resharpen so rapidly that you need not rely on the sharpening steel to tune up the edge.
UNPACKING AND PREPARING FOR OPERATION
The Model 2000 has a motor-drive section and a detachable Sharpening Module that is
packed and shipped disassembled (see Figure 1).
To assemble the Model 2000, insert the Sharpening Module into the guide rails of the
motor section, (Figure 2) and slide the module toward the motor housing until it locks in
place. If the sections do not snap together easily & quickly, follow the instructions in the
âInsertingâ section, (Page 8) of this manual.
3
Figure 1. Model 2000
sharpener - disassembled.
On/Off Switch
Sharpening Module
Motor-drive Section
Release Button
Product specificaties
| Merk: | Chef's Choice |
| Categorie: | Messenslijper |
| Model: | Diamond Hone 2000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Chef's Choice Diamond Hone 2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Messenslijper Chef's Choice
8 Januari 2024
8 Januari 2024
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
28 Oktober 2023
Handleiding Messenslijper
- Messenslijper IKEA
- Messenslijper Krups
- Messenslijper Adler
- Messenslijper Bartscher
- Messenslijper Beper
- Messenslijper Berkel
- Messenslijper Bifinett
- Messenslijper Blokker
- Messenslijper Bomann
- Messenslijper Domo
- Messenslijper EdgeCraft
- Messenslijper Fagor
- Messenslijper Gardenline
- Messenslijper Gastroback
- Messenslijper Gourmetmaxx
- Messenslijper Graef
- Messenslijper Gude
- Messenslijper Melissa
- Messenslijper Powerplus
- Messenslijper Presto
- Messenslijper Princess
- Messenslijper Roadstar
- Messenslijper Salter
- Messenslijper Silvercrest
- Messenslijper Sogo
- Messenslijper Steba
- Messenslijper Studio
- Messenslijper Tower
- Messenslijper Trebs
- Messenslijper Ozito
- Messenslijper Clatronic
- Messenslijper Guzzanti
- Messenslijper OBH Nordica
- Messenslijper Orbegozo
- Messenslijper Tacklife
- Messenslijper Waring Commercial
- Messenslijper Brentwood
- Messenslijper Genie
- Messenslijper C3
- Messenslijper Orava
- Messenslijper For_Q
- Messenslijper WĂźsthof
- Messenslijper Work Sharp
- Messenslijper Petra Electric
- Messenslijper GARDE
- Messenslijper IdeenWelt
- Messenslijper Donau Elektronik
Nieuwste handleidingen voor Messenslijper
8 April 2024
8 April 2024
8 April 2024
19 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
6 Maart 2024
6 Maart 2024
28 Februari 2024