Carrier Comfort Pro 33CSCPACHP-FC Handleiding

Carrier Thermostaat Comfort Pro 33CSCPACHP-FC

Bekijk gratis de handleiding van Carrier Comfort Pro 33CSCPACHP-FC (8 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 231 mensen. Heb je een vraag over Carrier Comfort Pro 33CSCPACHP-FC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden (0.9 MB)

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53330024-01 Printed in U.S.A. Form 33CS-24SOPg 18-11Replaces: New

Owner’s Manual

Part Number 33CSCPACHP-FC

SAFETY CONSIDERATIONS

Read and follow manufacturer instructions carefully. Fol-

low all local electrical codes during installation. All wiring

must conform to local and national electrical codes. Improper

wiring or installation may damage thermostat.

Recognize safety information. This is the safety alert sym-

bol . When the safety alert symbol is present on equipment

or in the instruction manual, be alert to the potential for person-

al injury.

Understand the signal words DANGER, WARNING, and

CAUTION. These words are used with the safety alert symbol.

DANGER identifies the most serious hazards which will result

in severe personal injury or death. WARNING signifies a haz

ard which could result in personal injury or death. CAUTION

is used to identify unsafe practices which would result in minor

personal injury or property damage.

GENERAL

Carrier’s Comfort Pro programmable fan coil with three-

speed fan operation thermostats are wall-mounted, low-voltage

thermostats which maintain room temperature by controlling

the operation of a heating and/or air conditioning system. This

fan coil model thermostat is capable of supporting fan coil

heat/cool, or heat only and cool only systems. A variety of fea

tures are provided including battery operation, separate heating

and cooling set points, auto changeover, keypad lockout, and

backlighting. Programming is available for either 2 or 4 periods

per day. The programming interface is a one touch interface,

with the comfort selections Occupied, Unoccupied, and Limit

(Energy Savings Mode). The user can adjust the heating and/or

cooling set points for each of the three comfort selections.

OPERATION

Thermostat Button Identification — The follow-

ing buttons are located on the thermostat display. See Fig. 1 for

button locations.

•FAN (1) — Selects whether the fan operates at low

speed (F1), medium speed (F2), high speed (F3), or auto

(only when needed for heating and cooling when in

unoccupied mode)

•HOLD/RUN (2) — Holds the currently selected temper-

ature or runs the scheduled program

•MODE (3) — Selects whether thermostat is set for heat-

ing, cooling, emergency heat, auto (heat and cool as

needed), or off

•UP (4) — Increases the temperature or adjusts the screen

selection up when setting advanced programming

features

•DOWN (5) — Decreases the temperature or adjusts the

screen selection down when setting advanced program

ming features

•DONE (6) — Saves settings when completing a set-up

or programming step

•LIMIT (7) — Indicates occupied heating and cooling

settings for the program period which are predefined and

more energy efficient

•UNOCC (8) — Activates heating and cooling settings

for the unoccupied program period

•OCC (9) — Activates heating and cooling settings for

the occupied program period

•D/H/M SET CLOCK (10) — Activates clock set mode

day/hour/minutes settings

•START TIME (11) — Activates the programming menu,

displaying the programmed start times

•PERIOD (12) — Activates the programming menu, dis-

playing the programmed time periods

•DAYS (13) — Activates the programming menu, dis-

playing three options - all days, weekdays and weekends

Thermostat On-Screen Indicators — The follow-

ing on-screen indicators can be displayed on the thermostat dis-

play. See Fig. 2 for location of indicators.

•Clock (1)

•Fan mode - on or auto (2)

•Selected heating set point; "on" indicates system is in

heating mode (3)

•System is in auxiliary (not used with this thermostat) (4)

•Current temperature (5)

•Thermostat mode is either off or using emergency heat

(Em Heat) (6)

•Fahrenheit units (7)

•Keypad is locked (no padlock means unlocked) (8)

OCCLIMITUNOCC

push and hold to set

set

schedule

daysperiodstart time

set

clock

d/h/m

mode

fan

done

o

heat

fan

auto

fan

aux

heat

cool

on:

temporary

hold

all days

weekdays

weekend

actual temp

start

10111213

hold

run

Fig. 1 — Thermostat Button Identification

(Door Open)

a33-9220

Comfort™ Pro

Programmable Fan Coil

Commercial Thermostat

Beoordeel deze handleiding

Product specificaties

Merk:	Carrier
Categorie:	Thermostaat
Model:	Comfort Pro 33CSCPACHP-FC

Foutcodes Carrier Comfort Pro 33CSCPACHP-FC

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Code	Betekenis	Oplossing	Pagina
E7	De thermostaat is geconfigureerd voor continue ventilatorwerking en de ventilatorknop is ingedrukt. De ventilatorsnelheid kan niet worden aangepast.	1. Controleer of de thermostaat is ingesteld op continue ventilatorwerking. 2. Zorg ervoor dat u niet probeert de ventilatorsnelheid aan te passen wanneer continue ventilatorwerking is ingeschakeld. 3. Wijzig de ventilatorconfiguratie naar automatische modus indien u de snelheid wilt aanpassen.	5
F1	Ventilatorfouttoestand waarbij de ventilator niet kan worden omgeschakeld van automatische modus naar continue ventilatorwerking in onbezette modus.	1. Controleer of de thermostaat in onbezette modus is ingesteld. 2. Zorg ervoor dat u de ventilator niet probeert om te schakelen naar continue modus terwijl de thermostaat in onbezette modus staat. 3. Schakel de thermostaat over naar bezette modus om de ventilatormodus aan te passen.	5
F2	Ventilatorfouttoestand waarbij de ventilator niet kan worden omgeschakeld van automatische modus naar continue ventilatorwerking in onbezette modus.	1. Controleer of de thermostaat in onbezette modus is ingesteld. 2. Zorg ervoor dat u de ventilator niet probeert om te schakelen naar continue modus terwijl de thermostaat in onbezette modus staat. 3. Schakel de thermostaat over naar bezette modus om de ventilatormodus aan te passen.	5
F3	Ventilatorfouttoestand waarbij de ventilator niet kan worden omgeschakeld van automatische modus naar continue ventilatorwerking in onbezette modus.	1. Controleer of de thermostaat in onbezette modus is ingesteld. 2. Zorg ervoor dat u de ventilator niet probeert om te schakelen naar continue modus terwijl de thermostaat in onbezette modus staat. 3. Schakel de thermostaat over naar bezette modus om de ventilatormodus aan te passen.	5

Alle foutcodes Carrier Thermostaat

Heb je hulp nodig?

Als je hulp nodig hebt met Carrier Comfort Pro 33CSCPACHP-FC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Handleiding Thermostaat Carrier

Carrier Comfort Pro 33CSCNACHP-01 Handleiding Carrier Comfort Pro 33CSCNACHP-FC Handleiding Carrier Connect 33CONNECTSTAT43FX Handleiding Carrier Edge Pro 33CS2PP2S-03 Handleiding Carrier Comfort Pro 33CSCPACHP-01 Handleiding Carrier Edge 33CS2PPRH-03 Handleiding Carrier Infinity SYSTXCCITC01-C Handleiding Carrier ClimaVision 7C-HS-C2W-X Handleiding Carrier Infinity SYSTXCCWIF01-B Handleiding Carrier Infinity SYSTXCCICF01-B Handleiding

Alle Carrier Thermostaat handleidingen

Populair in Thermostaat

Carrier ComfortVu BACnet TB-C Handleiding Carrier ComfortVu Handleiding Carrier ComfortVu BACnet TBPL-24-H-C Handleiding

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Vimar 30811.C Handleiding Vimar 30811.B Handleiding Vimar 02974.N Handleiding Soler & Palau THE 16/4A Handleiding Rademacher DuoFern 9433-1 Handleiding Abus Comfion FUSH80100 Handleiding Fantini Cosmi EV200RL Handleiding Fantini Cosmi CH177RL Handleiding Inkbird ITC-306A Handleiding Delta Dore Tybox RF 210 Handleiding