Aruba AP-503H Handleiding
Aruba
Access point
AP-503H
Bekijk gratis de handleiding van Aruba AP-503H (12 pagina’s), behorend tot de categorie Access point. Deze gids werd als nuttig beoordeeld door 91 mensen en kreeg gemiddeld 4.8 sterren uit 46 reviews. Heb je een vraag over Aruba AP-503H of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
Aruba 503H Hospitality Access Points
Installation Guide
Installation Guide | July 2020 1
The Aruba AP-503H Access Points are high-performance, multi-radio wireless devices that can be deployed in
either controller-based (AOS) or controller-less (Instant) modes in hospitality and branch or teleworker
deployments. The Aruba AP-503H Hospitality Access Points support the full 802.11ax (Wi-Fi 6) featureset with
dual 2x2 MIMO radios, deliver locationing functions, and can serve as a flexible IOT gateway, delivered through
the built-in BLE and 802.15.4 radio.
A variety of mounting scenarios are supported by a range of mount kits (sold separately). Make sure to purchase
the correct mount kit for the intended deployment of the AP.
Hardware Overview
The following sections outline the hardware components of the Aruba AP-503H Access Points.
Figure 1 AP-503H (front view)
1
2Aruba 503H Hospitality Access Points | Installation Guide
Figure 2 AP-503H (side and rear view)
Figure 3 AP-503H (bottom view)
Security
Screw
Reset
DC
Adapter
12V
E0
Console
E1 E2
Aruba 503H Hospitality Access Points | Installation Guide 3
LEDs
The hidden LED displays located on the front panel of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point, See Table 1.
Table 1 System Status LEDs
1 Blinking: one second on/one second off, 2 second cycle.
2 Flashing Pattern 1: mostly on, briefly off, 2 second cycle.
3 Flashing Pattern 2: mostly off, briefly on, 2 second cycle.
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.
Table 2 Radio Status LEDs
1 Alternating: one second each color, 2 second cycle.
LED Display Settings
The LEDs have three operating modes that can be selected in the system management software:
Default mode: Refer to Table 1 and Table 2
Off mode: LEDs are off
Blink mode: LEDs blink green
Force the LEDs into off mode and back to software defined mode by pressing the reset button for a short
duration. Warning: pressing the reset button for longer than 10 seconds may cause the AP to reset and return to
factory default state.
Color/State Meaning
Off Device powered off
Green- blinking 1Device booting, not ready
Green- solid Device ready, fully functional, no network restrictions
Green- flashing pattern 12Device ready, fully functional, uplink negotiated in sub-optimal speed (<1Gbps)
Green- flashing pattern 23Deep sleep mode
Red System error condition - Immediate attention required
Color/State Meaning
Off AP powered off, or both radios disabled
Green- solid Both radios enabled in access mode
Green- blinking One radio enabled in access mode, other disabled
Amber- solid Both radios enabled in monitor mode
Amber- blinking One radio enabled in monitor mode, other disabled
Green/Amber-
alternating1Green: one radio in access mode
Amber: one radio in monitor mode
Product specificaties
| Merk: | Aruba |
| Categorie: | Access point |
| Model: | AP-503H |
Heb je hulp nodig?
Als je hulp nodig hebt met Aruba AP-503H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Access point Aruba
20 Augustus 2024
19 December 2023
19 December 2023
30 Mei 2023
25 Mei 2023
25 Mei 2023
8 Mei 2023
7 Mei 2023
29 April 2023
23 April 2023
Handleiding Access point
- Tenda
- Fortinet
- Black Box
- Cambium Networks
- Eminent
- Alta Labs
- AMX
- Homematic IP
- Airlive
- NUVO
- Media-tech
- ICC
- Allnet
- Comtrend
- Macally
Nieuwste handleidingen voor Access point
2 Juni 2025
15 Mei 2025
13 Mei 2025
1 Mei 2025
25 April 2025
23 April 2025
19 April 2025
16 April 2025
16 April 2025
16 April 2025