Aruba AP-318 Handleiding

Aruba Access point AP-318

Lees hieronder de 📖 handleiding in het Nederlandse voor Aruba AP-318 (14 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

Aruba 318 Series Wireless Access Point

Installation Guide

Rev 09 | May 2023 1

The Aruba 318 Series access points support IEEE 802.11ac Wave 2 standard, delivering high performance with

the MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g/n

wireless services.

The 318 Series wireless access point provides the following capabilities:

IEEE802.11a/b/g/n/ac operation as a wireless access point

IEEE802.11a/b/g/n/ac operation as a wireless air monitor

IEEE802.11a/b/g/n/ac spectrum monitor

Compatibility with IEEE 802.3at PoE

Guide Overview

“Hardware Overview” on page2 provides a detailed hardware overview of the 318 Series access points.

“Before You Begin” on page4 provides key questions to ask and items to consider when deploying a wireless

network.

“Installing the AP” on page6 describes the multi-step process for a successful installation and deployment of

the 318 Series access points.

“Safety and Regulatory Compliance” on page10 provides an overview of safety and regulatory compliance

information.

Package Contents

318 Series access point

Ethernet cable gland x1

USB console cable

Copper lug x1

M4x6 screw x1

Tools Required

Phillips screwdriver (#2 for M4x6 screw)

Flat blade screwdriver (Ethernet cable gland covers)

8mm allen or hex key (USB console cover)

The weatherproof caps for Ethernet and Console interfaces are connected to the access point, not loose in the

package.

Mounting kits for use with the 318 Series access points are sold separately. Contact your Aruba sales

representative for details.

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,

including the original packing materials. Use these materials to repack and return the unit to the supplier if

needed.

2 Aruba 318 Series Wireless Access Point | Installation Guide

Hardware Overview

Figure 1 318 Series Front View

Figure 2 318 Series Bottom View

LED

The 318 Series access point is equipped with one LED that indicates the system status of the access point.

E0/POE

E1/SFP

Grounding Point

USB Console Port, Reset button and LED

External antennas for this device must be installed by an Aruba Certified Mobility Professional (ACMP) or other

Aruba-certified technician, using manufacturer-approved antennas only.

The Equivalent Isotropically Radiated Power (EIRP) levels for all external antenna devices must not exceed the

regulatory limit set by the host country/domain.

Installers are required to record the antenna gain for this device in the system management software. A list of

approved antennas can be found at: http://www.arubanetworks.com/assets/og/OG_AP-318Series.pdf.

Les antennes externes pour cet appareil doivent être installées par un professionnel de la mobilité certifié Aruba

(ACMP) ou un autre technicien certifié Aruba, en utilisant uniquement des antennes approuvées par le fabricant.

Les niveaux équivalents de puissance à rayonnement isotrope (EIRP) pour tous les périphériques d'antenne

externe ne doivent pas dépasser la limite réglementaire définie par le pays hôte / domaine.

Les installateurs doivent enregistrer le gain d'antenne pour cet appareil dans le logiciel de gestion du système.

Aruba 318 Series Wireless Access Point | Installation Guide 3

Table 1 318 Series LED Meanings during Boot Up

Table 2 318 Series LED Meanings during Operation

USB Console Port

The USB Micro-B console port allows you to connect the access point to a laptop or serial console for direct

management. Use the included USB console cable to connect the access point. You can download the necessary

driver for USB-UART adapter from support.arubanetworks.com under the Tools & Resources tab.

Use the following setting to access the terminal:

Reset Button

The reset button can be used to return the access point to factory default settings. To reset the access point:

1. Power off the access point.

2. Press and hold the reset button using a small, narrow object, such as a paper clip.

3. Power-on the access point without releasing the reset button. The system LED will flash within 5 seconds.

4. Release the reset button.

The system LED will flash again within 15 seconds indicating that the reset is completed. The access point will

now continue to boot with the factory default settings.

LED Color/State Meaning

System LED Off No power to AP

Red Initial power-up

Green - Flashing AP booting

Green - Steady AP ready and 1000Mbps Ethernet link established. The LED

turns off after 1200 seconds

Green - Yellow, 6 seconds

period

AP ready and 10/100Mbps Ethernet link established. The LED

turns off after 1200 seconds

LED Color/State Meaning

System LED Solid Red General fault

One blink off every 3

seconds

Radio 0 fault (5 GHz)

Two quick blink off 0.5

seconds apart cycled every

3 seconds

Radio 1 fault (2.4GHz)

You need a proper 8mm allen or hex key to open the cover of the USB Console port.

Table 3 Console Settings

Baud Rate Data Bits Parity Stop Bits Flow Control

9600 8 None 1 None

Product specificaties

Merk:	Aruba
Categorie:	Access point
Model:	AP-318
Gewicht:	1225 g
Breedte:	150 mm
Diepte:	222 mm
Hoogte:	75 mm
Plaatsing:	Muur
USB-connectortype:	Micro-USB
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Modulatie:	16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az
Ondersteunde beveiligingsalgoritmen:	IPSec
Temperatuur bij opslag:	-40 - 70 °C
Intern:	Nee
Aansluiting antenne:	RP-SMA
Hoogte, in bedrijf:	0 - 3000 m
Maximale overdrachtssnelheid van gegevens:	1733 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Ja
Aantal connectors:	6
Stroomverbruik (typisch):	23 W
Bedrijfstemperatuur (T-T):	-40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Spread spectrum methode:	DSSS, OFDM