AMX NMX-DEC-N2235A Handleiding

AMX Digitale decoder NMX-DEC-N2235A

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX NMX-DEC-N2235A (15 pagina's) in de categorie Digitale decoder. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15

NetLinx Control for N-Series Products - Documentation Addendum 1

NetLinx Control for N-Series Products

Documentation Addendum

Introduction

NetLinx Studio is commonly used by system programmers to streamline the integration, programming, organization,

and support of their AMX equipment. As the cornerstone of AMX's system design software tools, NetLinx Studio

offers programmers the most flexible application capable of generating the most sophisticated code possible. Now

equipment in our latest N-Series Networked AV Product comes equipped with NetLinx support. This addendum

introduces the new configuration aspects necessary to bring all of your NetLinx-compatible equipment up to speed

with the latest functionality. This addendum covers NetLinx functionality as it applies to AMX’s N-Series product line

and is designed to be used as a supplement to additional product documentation found on our website at

http://www.amx.com/techcenter/.

Special Considerations

Netlinx operation requires multicast groups that may conflict with specific video stream numbers. When using

Netlinx you must avoid these stream numbers to ensure proper operation:

Multicast Mode

Non-interleaved: Avoid streams 31482 and 31483.

Interleaved: Avoid streams 32125 and 32126.

NetLinx Configuration Using the Unit’s Webpage

From any main page of the unit webpage, click the NetLinx tab. See Figure 1. Table 1 provides descriptions for each

configuration option.

NOTE: For instructions on how to log in to your unit for the first time, please see the Quick Start Guide (provided in

shipment) or visit our website to view the unit’s user manual.

FIGURE 1 NetLinx Configuration Page

Click here to access NetLinx

configuration options.

Configuration options available will

depend on which Master Mode you

choose. See Table 1 for more details.

Introduction

NetLinx Control for N-Series Products - Documentation Addendum 2

Batch Configurations Using N-Able

One of the many benefits of using N-Able control is batch configuration. This is especially useful in larger

deployments. Instead of using the individual unit web pages (discussed in the previous section), simply open N-Able

and select Tools > Batch Config. See Figure 2.

FIGURE 2 Selecting Batch Config in N-Able

The screen shown in figure xx displays and allows you to choose the units you would like to enable for NetLinx

control. To select multiple units, hold down the <Ctrl> key. Once all of the units are selected, enable the NetLinx On

button and click the OK button at the bottom of the screen.

FIGURE 3 Enabling NetLinx on Multiple Units

NOTE: Items are not filtered. In other words, if you send a NetLinx command to a device that does not support it, the

command is simply ignored.

TABLE 1 NetLinx Page Options

Command Description

Enable Click to enable/disable NetLinx on this device.

Device Status This status field will show the device to be Online, Connected, Offline, or Unknown.

Master Mode Select Auto, Listen, or URL.

IP/URL Enter the address of the Master Controller.

Port This field should always be set to 1319.

Device Number Defaults to a dynamic device number. May be set to a static range (e.g., 8000).

System Number Determines which system to connect. This setting is dependent upon the Master Mode selected (see above).

• If Master Mode is set to Auto, the System Number is set and the system discovers the Master Controller’s IP

address.

• If Master Mode is set to Listen, the device connects to any Master Controller.

• If Master Mode is set to URL, the IP of the Master Controller is set.

Username Username for the Master Controller.

Password Password for the Master Controller.

Save Save settings made on this page.

Encoder/Decoder Commands

NetLinx Control for N-Series Products - Documentation Addendum 3

Encoder/Decoder Commands

The following section provides information on native, string, IR, and serial commands for N-Series Encoders and

Decoders as related to NetLinx management. Commands are issued on the following ports:

• Port 1: Native and String Commands

• Port 2: IR Commands

• Port 3: Serial Commands

Native Commands Port 1

Command Description

CO <stream>

Set the current Encoder stream number.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’CO <stream>’

Variables:

stream = The target stream number from 1 to 32767.

NOTE: Stream number MOD 256 must not equal 0 or 255.

Examples:

SEND_COMMAND 5002:1:0, ’CO 2’

Command the Encoder to transmit on stream 2.

CI <stream>

Set the current Decoder stream number.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’CI <stream>’

Variables:

stream = The target stream number from 0 to 32767.

NOTE: Stream number MOD 256 must not equal 0 or 255. The only exception to this

limitation is that the stream number can be 0 (no stream).

Examples:

SEND_COMMAND 5002:1:0, ’CI 2’

Command the Decoder to receive stream 2.

CA <stream>

Set the current Decoder Audio stream number.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’CA <stream>’

Variables:

stream = The target stream number from 0 to 32767. Set to 0 for the audio stream to

follow the video stream.

Examples:

SEND_COMMAND 5002:1:0, ’CA 2’

Command the Decoder to receive audio stream 2.

AUDOUT_MUTE

Set the audio mute.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’AUDOUT_MUTE-<ENABLE|DISABLE>’

Variables:

ENABLE = Enables audio mute.

DISABLE = Disables audio mute.

Examples:

SEND_COMMAND 5002:1:0, ’AUDOUT_MUTE-ENABLE’

Enable audio mute.

VIDOUT_MUTE

Disable the Encoder/Decoder output stream.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’VIDOUT_MUTE-<ENABLE|DISABLE>’

Variables:

ENABLE = Enables video mute.

DISABLE = Disables video mute.

Examples:

SEND_COMMAND 5002:1:0, ’VIDOUT_MUTE-ENABLE’

Enable video mute.

LIVE_PLAY

Set the device into live play mode.

IMPORTANT: This command must be sent to D:P:S port 1.

Syntax:

SEND_COMMAND <DEV>, ’LIVE_PLAY’

Examples:

SEND_COMMAND 5002:1:0, ’LIVE_PLAY’

Enable live play.

Product specificaties

Merk:	AMX
Categorie:	Digitale decoder
Model:	NMX-DEC-N2235A
Aantal USB 2.0-poorten:	2
Aantal Ethernet LAN (RJ-45)-poorten:	1
Maximale videoresolutie:	- Pixels
Aantal kanalen:	- kanalen
Aantal HDMI-uitgangen:	1