Teradek Slice 776 Handleiding

Bekijk gratis de handleiding van Teradek Slice 776 (2 pagina’s), behorend tot de categorie Digitale decoder. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over Teradek Slice 776 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Stream/Menu Control dial:

▲: Go live, start/stop push, start/stop recordings, select characters

, ,: Selects options from streaming/recording prompts▼

: Back, move to higher menu level

●(Control dial button press): Confirm selection, enter main menu, open selected menu

▲

▲

NETWORK CONNECTION

Connect A/C power to the Power Input . Attach the included Wireless antennas via the threaded (E)

RPSMA connectors.- (L)

Connect the SDI output from your video source to the HDSDI , or the HDMI input on the Slice -(F)(G)

encoder.

Connect Slice to your network via the 10/100/1000 Ethernet port .(H)

2

1

3

2

A: Power button

B: USB ports

C: Reset button

D: Stream/menu control dial

E: A/C input

F: SD/HD/3G−SDI input/output

G: HDMI input/output

H: 10/100/1000 Ethernet

I: Reset button

J: Headphone audio output

K: Mic/Line stereo input

L: RPSMA connectors-

A

C

D

EI

J

K

F

G

H

AC adapter

WiFi antennas

B

L

Connect to Slice’s Wi−Fi network (AP mode): Teranet−XXXXX (serial number of the device). If Slice has

already been configured to connect to another network (Infrastructure mode), connect to that instead.

Plug an Ethernet cable into Slice’s 10/100/1000 Ethernet port and connect it to an Ethernet switch

or router. Use the Menu joystick to navigate to the Network Setup menu, and verify that Ethernet is

enabled and set to DHCP.

Open a web browser and navigate to http://172.16.1.1, or find Slice using Bonjour.

Connect your computer to the same network as Slice. From the main status screen, press on Slice’s menu ▼

joystick to display Slice’s IP address on the front panel.

Slice’s Wi−Fi can also be configured to join your network via the web UI or front panel.

Open a web browser and navigate to Slice’s IP address, or find Slice using Bonjour.

Slice has a built in web user interface (web UI) for configuring stream destinations, encoder

parameters, and other settings. The interface can be accessed by connecting via Wi−Fi or Ethernet.

1

1

2

2

3

3

CONNECT VIA WIFI−

CONNECT VIA ETHERNET

Slice 700 series encoders support 1080p, 60fps encoding using both HEVC and H.264 codecs. HEVC

provides the most efficient encoding for both low bitrate and high quality applications, while H.264

supports a wider variety of streaming platforms and is one of the most common video codecs worldwide.

The codec can be switched between HEVC and H.264 from the Encoder Settings and Video Stream Output

settings pages on the web UI, or from the Video Setup menu on the front panel.

NEED MORE HELP?

1. Support: http://support.teradek.com Contains tips, information and all the latest firmware & software updates. →

TERADEK SUPPORT STAFF: supportteradek.com or call 8889412111 ext2 (MonFri 9am to 6pm PST)@−−−

POWER AND CONNECT

1

HEVC AND H.264

3

Product specificaties