Alora Marcel EW464002 Handleiding

Bekijk gratis de handleiding van Alora Marcel EW464002 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Alora Marcel EW464002 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Marcel

EW464002

NOTEIC

• T r far suct out t et caot heimpotantsaegudsandintrionslinedinhisshenn

cov le ct t that may occur.tst be er allpossibondiions andsituaions I mu

undeood hat tainbeoled.hesrsttcaut cerion and care factorsust m flow Te

inions idedsahighendstructarrove p foyor ur fet we y andly recomm that a

liensed,tricianintall hisnic tralecined e st ut.

• T ur tountcorrectlstall staard hisfixte is designedo be med on a y inednd

rouoco throur boithaer T bond or tagon bx ORgh a wiingx w a plstr fame.hex

mubesecounedhee heding.heossbst urely mt to t stcturruotf buil T crar and

happliedshobeused,diingheherdware su uld rectly mount t fixture to t o

utlet

bomake le to correctl t ure.x y mait impossiby alignhefixt

ALSSEMBY ONINSTRUCTIS

WD CAISARNINGS ANUTON

· Make sure is POWERCOMPLETELY OFFat the fuse box

·Have your fixture installed by a qualified licensed electrician

· Prepare everything in a clear area

· Wear gloves at all times during this installation

·Read instructions carefully before you start assembly

· Keep this installation sheet for future reference

P.

CDA:ANA19054 28 - Sur V3Z 6Mth Ave.,rey,C B3

USA:3035 ELiRd.V. one Mountan - Las egas, N1V 8908

www.aloram.comood

TECHNICPOTAL SUPR

1.855.855.8926

tecalpportlor.comchnisu@aalighting

1.855.855.8926

20230109

Step 1

Remove fixture from its original package.

Step 2

Separate mounting plate (1c) from canopy (2a) by removing

washers (2c) and canopy screws (2b).

Step 3

Attach mounting plate (1c) to electrical junction box (1a) using

junction box screws provided (1e) in hardware package.

Step 4

Make proper electrical connections (blackhotwhite to “L”, to

neutralground “N”, to “GND”) with wire nuts (1b) provided in

hardware package.

Step 5

Attach canopy (2a) to mounting plate (1c) with washers (2c) and

canopy screws (2b).

Step 6

Install recommended lamp (4a) (not provided) (referred on the

socket label for maximum wattage and type) to fixture socket.

Step 7

Attach glass (3b) to fixture (3a) by threading clockwise.

Step 8

To prevent moisture from entering the electrical junction box (1a)

and causing a short, seal around the top and side perimeter

between the fixture and the wall surface with weather resistant

caulking (Illustration 1). The space at the bottom should be left

un-caulked to prevent moisture build up.

You are now ready to enjoy your fixture.

1a.1c.1e.2a.1b.

2c.

3a.

4a.

3b.

caulking

Illustration 1

2b.

Please Note:

· 120V input

Product specificaties